[johnny bravo]

can anyone help me out and let me know what you have used as a cover for the end of your  clx pole , mine cracked this morning , the bottom has dropped off the casing leaving it open showing pole ends etc. cant seem to get it off,  i will check gardiners site to see what they have.

[Alex Gardiner]

can anyone help me out and let me know what you have used as a cover for the end of your  clx pole , mine cracked this morning , the bottom has dropped off the casing leaving it open showing pole ends etc. cant seem to get it off,  i will check gardiners site to see what they have.

Do you mean the end cap?

Drop me an email on alex@agardiner.co.uk with the date of pole purchase and if possible a photo and I will look into this for you.

Our end caps are glued on so would need cutting off to replace - http://www.gardinerpolesystems.co.uk/acatalog/End_Caps.html

[bobplum]

alex,
while your lurking about do you have a connection to get micro-bore straight on to a heavy duty outlet elbow
many thanks
bob

[Mike #1]

Get yourself down local sports shop and get some squash balls . Chop the top off to fit on end of pole  and cut a star shaped aparture to allow pole hose through .

That is what i have used on my poles for over 3 yrs now and they are far better than any standard end caps . Mike

[Alex Gardiner]

alex,
while your lurking about do you have a connection to get micro-bore straight on to a heavy duty outlet elbow
many thanks
bob

If you are referring to the bent elbow coming out of the centre of a steel petal hose reel



Then you will need a brass screw to barb fitting - http://www.gardinerpolesystems.co.uk/acatalog/brass-male-screw-thread-to-hose-barb-fittings.html

1/8" to 6mm barb

This screws into the inside of the elbow outlet.

[simon w]

Get yourself down local sports shop and get some squash balls . Chop the top off to fit on end of pole  and cut a star shaped aparture to allow pole hose through .

That is what i have used on my poles for over 3 yrs now and they are far better than any standard end caps . Mike

Good shout. Whats the maximum base section a squash ball will fit on to? was thinking of taking up squash in 2013 

[johnny bravo]

CLX 27 around 2 year old,    has marking on side  CLX27 GARDINERS. CANT UPLOAD PIC

[johnny bravo]

maybe size 6

[Mike #1]

I have used on a 30 ft carbon elite pole and other sections on a regular basis as i add and remove sections as and when needed . Mike

[Alex Gardiner]

CLX 27 around 2 year old,    has marking on side  CLX27 GARDINERS. CANT UPLOAD PIC

Hi Johnny

To have lasted 2 years is pretty good for a humble end-cap. To replace you would need a size 6 end cap at £1.45 - http://www.gardinerpolesystems.co.uk/acatalog/size-6-end-cap-for-cl-x-sl-x.html

[CLEANCARE WC]

Get yourself down local sports shop and get some squash balls . Chop the top off to fit on end of pole  and cut a star shaped aparture to allow pole hose through .

That is what i have used on my poles for over 3 yrs now and they are far better than any standard end caps . Mike

Good shout. Whats the maximum base section a squash ball will fit on to? was thinking of taking up squash in 2013 

just another quick tip, you are better off keeping the balls whole for playing squash