[Fin Clearview]

Got my first roof on tomo I'm using g101. First of all I didn't really know how to price it, although I used to do conny roofs when I was trad I knew my price as I could only really clean the panels not the supports or the decorative top. Anyway it has 4 glass panels to three sides, i havent priced for the windows on it as they are included in the maintenance clean, I priced the roof at £50. Was this a fair price, and when doing the roof do you start at the decorative piece and work down or panels first then top so as to not allow any g101 to dry on the glass while doing the top piece. Any pointers much appreiciated, cheers.

[Dave Garrett]

Done exactly same today glass etc using g101 ...Make sure you water down mix ,do top first and rinse well stubborn stains use neat g101 but do not leave on too long ....works just aswell sprayed onto brush head

[Cliff perkins]

Start at top do both sides then when top fancy bits are done do the rest easy

[sunshine windies]

i normally just use pure, is that not the best way then ?

[Dave Garrett]

Pure is good no doubt but a bit of g101 50% reduction in time imho

[Dave Garrett]

£50 good price done mine same size £30 and she hesitated

[Fin Clearview]

 I thought £50 was quite a lot but the roof is north facing and covered in algae, custy was ok anyway. I'll follow the advice with the top etc, thanks