[ben M]

 Last week I bought a slx 25 with The Super-Lite® Radius-Sill Brush Flat-Trim Medium Bristles and a gooseneck standard 10''.

This week i bought The Super-Lite® Radius-Sill Brush Flat-Trim Stiff Bristles , option brush fitting plastic 90* and a Resi-Neck™ Quick-Release Type 1.
How can i connect my pole hose with my new brush? Did i miss something?

Thank you.

Ben

[londoncleaners]

So what's with all the copy and pasting geeee

[ben M]

because i am a lazy sod 

[♠Winp®oClean♠]

The pole hose goes up & right through the tube of the resi neck. Look & you'll se a hole in the top.

[Window Washers]

The pole hose goes up & right through the tube of the resi neck. Look & you'll se a hole in the top.

or read the instruction manual 

[Alex Gardiner]

Last week I bought a slx 25 with The Super-Lite® Radius-Sill Brush Flat-Trim Medium Bristles and a gooseneck standard 10''.

This week i bought The Super-Lite® Radius-Sill Brush Flat-Trim Stiff Bristles , option brush fitting plastic 90* and a Resi-Neck™ Quick-Release Type 1.
How can i connect my pole hose with my new brush? Did i miss something?

Thank you.

Ben

What I do is take a short length (about 25cm) of pole hose and fit it to the brush and then feed it through the hole in the Resi-Neck (as posted above). Then attach a John Guest 8mm straight connector to the bottom of the length of hose. When you need to switch gooseneck and brush assemblies simply release the gooseneck, disconnect the John Guest and switch over.

[ben M]

It's what i thought! Going to order the missing part now 

Thanks for your help, speedy response as always.

Ben

[stuart mc]

Re: Please help Alex Gardiner



all along and alex didn't need any help, he knew how to do it already

[ben M]

very true 

I should have said: Please help Me Alex Gardiner 

[Window Washers]

Last week I bought a slx 25 with The Super-Lite® Radius-Sill Brush Flat-Trim Medium Bristles and a gooseneck standard 10''.

This week i bought The Super-Lite® Radius-Sill Brush Flat-Trim Stiff Bristles , option brush fitting plastic 90* and a Resi-Neck™ Quick-Release Type 1.
How can i connect my pole hose with my new brush? Did i miss something?

Thank you.

Ben

What I do is take a short length (about 25cm) of pole hose and fit it to the brush and then feed it through the hole in the Resi-Neck (as posted above). Then attach a John Guest 8mm straight connector to the bottom of the length of hose. When you need to switch gooseneck and brush assemblies simply release the gooseneck, disconnect the John Guest and switch over.

I new there was a method to your madness, I did look at this myself and wondered why, then straight away thought Alex would have put that there for a reason.   

I just learnt something new today, awesome stuff 

[s.w.c]

its not rocket science

[Window Washers]

its not rocket science

i'm not a rocket