[colin purewater]

Hi people,

          I always have mr flow controller set at the same number
Theese are digital, but the last week or so I've noticed
That the flow keeps changing, sometimes the flow drops
A bit low and dome times the flow is so high
The water is bouncing of the windows and making a noise
On the glass!

Any ideas?? Would it need to be re calibrated or would it be
Some thing else ? The system is only about 8 months
Old and from the cleaning ware house

Many thanks

Colin.

[Smudger]

is the controller number changing or just the dropping off then coming back up ?

i'd check the batt first - make sure you have plenty of charge in it

Darran

[colin purewater]

No mate staying on the same number!

I've got a split relay on the bat I'll check that is working ok

Cheers mate

[Ian Sheppard]

If the flow rate on the controller is staying the same it may be a battery voltage issue, Does the controller show BATT?

Also check you connections between the controller and pump try to keep cables as short as possible as the longer the cable the greater volt drop.
It may also be ensuring there are no restrictions or blockages in the hose or jets.

Failing all the above if you have altered or changed any of your fittings it may just be you need to re calibrate the controller.

[colin purewater]

cheers ian, ive just checked at the above and all seens fine and dandy, never says batt,

probly just have to re-call the controller.... this should be fun as ive miss placed the instructions :

[Ian Sheppard]

Colin I have just emailed instructions to you.

[♠Winp®oClean♠]

Do you have anything "after" the pump, like a DI vessel?

Also check your strainer, it could well need cleaning! I've just had to sterilise my tank after it was full of microscopic algae & was blocking the strainer within an hour!!

[colin purewater]

only the strainer  after the pump mate ill check that now thanks

[♠Winp®oClean♠]

only the strainer  after the pump mate ill check that now thanks

The strainer should be "BEFORE" the pump!!

[Frankybadboy]

only the strainer  after the pump mate ill check that now thanks

The strainer should be "BEFORE" the pump!!

could be why the pump got problems.

[J. Domingos]

A nice 80amp Batt. , strainer After pump, Aquatec pump with switch on it, and why not one of this,

http://www.ebay.co.uk/itm/300652316538?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1256wt_1344

[♠Winp®oClean♠]

A nice 80amp Batt. , strainer After pump, Aquatec pump with switch on it, and why not one of this,

http://www.ebay.co.uk/itm/300652316538?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_1256wt_1344

Do you know the purpose of a strainer?

[colin purewater]

sorry strainer is in correct place am just a plonker!

it was a dirty strainer so cleaned that and recalled flow controller

all fine and dandy now thanks for the help 

[♠Winp®oClean♠]

sorry strainer is in correct place am just a plonker!

it was a dirty strainer so cleaned that and recalled flow controller

all fine and dandy now thanks for the help 

Keep your eye on the strainer over the next couple of days.

[colin purewater]

sorry strainer is in correct place am just a plonker!

it was a dirty strainer so cleaned that and recalled flow controller

all fine and dandy now thanks for the help 

Keep your eye on the strainer over the next couple of days.

Ill be sure to do that thank you