[barry mallett]

my tds has gone from 000 to 010 in the last few days  havent got a clue why . got a conny roof clean in the morning as well any ideas .

[windiewasher]

membranes probably shot it!

[bobplum]

i would still use the water at that reading

[windiewasher]

me too especially if only a conny roof!

i would still use the water at that reading

[barry mallett]

dont have any membranes ,i think

[Neil Gornall]

Barry. Have you tried rinsing and wringing out your scrim more often? 

[barry mallett]

thanks neil i will try that

[wpclean]

Barry. Have you tried rinsing and wringing out your scrim more often? 

Somone told me they now sell scrims pre - washed !!!     Technology eh  !

[the bfg]

Ive heard if you go to the foot of your garden and say out loud I'm wfp not trad 33 times your tds will go back down

apparently all the taffs swear by it

[Nameless Drudge]

 put the price up as your now using mineral water.

[Crystal-clear]

Hi barry could be anything ,

Resin,membranes, have you been changing your pre filters and flushing your membranes regularly?

could also be water works in your area sometimes this changes the tds of your tap water higher therefor more work for your system etc hope this helps.

[birdymiller]

bin the wfp and get tradding

[barry mallett]

thanks for the tips guys . forgot to mention i am di only . my tap water is only 80 . so does any one know how to flussh my resin

[BORBRYCE]

Give it a good pish Barry. Not now, wait till you are burstin. Cleans the thing right out it does.

[Crystal-clear]

Ull have to replace the resin ,

try give it a shake first it might just get you a bit more out of it 80tds is low but if i were u i would still get an RO

[windiewasher]

I would have a ro with water with tds of 80!
My membranes have shot it on my ro and its coming out at 57 and eats resin for fun!
Just ordered my new membranes as i will save in the long run when the water is coming out at less than 20 out of the ro!

thanks for the tips guys . forgot to mention i am di only . my tap water is only 80 . so does any one know how to flussh my resin

[dazmond]

are you taking the pee barry? i never know when your being serious!!!


if your DI only try running the tap to DI slower when dionising.check the tds of your tap water.mines normally 35-45 but last year it shot up to 110 for  about a month.shake the vessel a few times as well.

if you seem to be using more resin than normally its more than likely your tap tds has shot up mate.


best wishes


dazmond

[barry mallett]

thanks for the info guys . got me thinking about an r o  now . my mates got one , think its a 40/20 . presume this gets the tds down by half .anyway if i did get one  would i put iy after the pump but before the di . or would it make more sense to put it after the di , especialy with the tds rising in my di , then the ro would bring it down , any ideas .cheers barry

[G Griffin]

my mates got one , think its a 40/20 .

Don`t forget, he`ll have the head and feed, too.

[barry mallett]

glad you got that griff looks like the rhinos all the way