Every morning when using wfp for 1st clean, it takes several minutes for the flow to work properly due to air in the system.
I have checked all connections to and from the water tank, especially in the pump area but can't find anything.
Any suggestions?
Thanks
Rob
tighten every thing up sounds like there is a air leak somewhere.
worst case, take off the connection to the pump from water tank and suck the pipe, put your thumb over pump inlet and turn it on, if it sucks your finger there air lock in not in the pump if air is in the pump attach a pipe and blow and suck pipethe pipe to remove the air.
My guess is an air leak in the pipe air can get in but not water out with is highly annoying, a turn or 2 on the clips may sort this out..
Ian