[wightsurf]

Well i got it from china but no instructions so any ideas on how to wire it up please  The key has 2 switches,so i think that i could if needed use it for 2 different devices,but i only want to turn pump off and on.

This is the lay out of the terminals

DC 12V + -

NO2
COM2
NO2
NO1
COM1
NC1 (is this one a miss print,i thought NO1 ??)

Thanks for any help with this.

[d s windowcleaning]

any chance you can put a picture on of the fob

[wightsurf]

Sorry can't do pic at the mo.what else would you like to.know about it.

[d s windowcleaning]

have you got a link for this it will make it easier to explain the wiring after seeing which type youve got . on the actual remote unit not the fob is there 4 connection holes with little screws in ?

[wightsurf]

There is a screw on all of what I put in first post.
So + screw
     -   screw
  No2 screw
And so on.

[d s windowcleaning]

without really seeing it it makes it a bit harder but it should go like this
+ red wire to battery
- black wire to battery
nxt screw red wire to red wire on pump
nxt screw black wire to black wire on pump

[wightsurf]

Ok thanks,I will use. Amp meter and see if
It puts anything through .

[d s windowcleaning]

let us no how you go on with it , ive given you the wiring order of the remote unit i used to have so with a bit of luck it minght run in the same order .

[wightsurf]

It did not work
Any more ideas

[d s windowcleaning]

sorry this dint work , a few pictures of the remote unit would help a lot pictures speak a 1000 words .