[dave0123]

I think am using an older type flojet pump actually on the pump it says flopump and its 4.6 litre a min installed in an omnipole system.

I am looking at fitting a veristream to it its the older dial one ive searched on here to to wire one up to flojet cant really see anything.

as far as i can tell the pump has a black and red wire coming out the top and a red one at the bottom which joins to one of the top ones i think..  which wires do i cut to fit a veristream in between

[dave0123]

ive looked closer...

and i think there's two wires that come out the back of what i can see the pressure switch and one joins a to a top wire red i think then to the battery?

[A & J Owen Window Cleaning]

dave i think its the red one that runs the pump and controller the black is just the earth wire.

[dave0123]

thing is theres a red and black at the top and from what i can gather because its hard to see two wires at the bottom or is one of the top wires coming out of the top of the pump supposed to be joined to the bottom?

at present it has no controller connected

[ScrimShady]

i used one of these many years ago, there is a red a black wire coming from the top of the pump, the red goes down to the presure switch the another red comes out of the switch and back up to the black
just take the red and black wire coming out of the pum and wire that to the varistream.
hope that helps

[dave0123]

Hiya Scrim,

jus just cut it and use the two top wires black/red our the top end of the pump?

[ScrimShady]

thats it.. 

[dave0123]

Cheers mate much appreciated. seems simple enough.