[steve k]

I have a 03 Renault Kangoo CDi 70 with 12 months MOT and 6 months tax. 56k miles ex British Gas so maintained in great condition with brand new industrial roof bars.
Fitted with a 400 litre system with 4040 RO, 2 x 20" pre-filters and a DI resin cylinder. Solenoid fitted allowing fill up with automatic cut off when full and a split relay system to a brand new deep cycle leisure battery fitted to a hydroflow water controller.
Metal hosereel with 100m of 8mm microbore and a 24ft CLX pole only 2 months old.

System was purchased from and installed by windowcleaningwarehouse in December 2009 for over £2000 and has had just 5 days use each month since installation so is virtually brand new and produces 002 from RO and 000 from the pole.

The best van system I have had and a shame to let go but another career beckons so selling on for £4000 ono

I will sort out some photographs ASAP 
 
 
 

[Leeroy]

Would like to see photos please also where are you

[Crystal-clear]

yep get us some picts asap , your location mate?

[steve k]

Liverpool...van has 54700 miles and photos will be on today

[steve k]

[steve k]

[steve k]

[steve k]

[steve k]

[suds window service]

nice set up even got the bubbles on we could keep them. suds.

[suds window service]

steve is everything in good working order....i mean after the winter and frosts we,ve had.
 filters and the like?              contact number steve?   

[steve k]

yes...I have just put 2 new filters and filter housings on the system and a new leisure battery.
The RO was used indoors in a static set up during the bad weather  so was unaffected by low temperatures. RO produces water at 002 ppm.

0789 1502 961

[Crystal-clear]

Nice system,

i always prefer the water going from the ROs then the resin then the tank so 0.00ppm in the tank then the pole i see you got the pump drawing water to the resin then the pole, does this put a bit of pressure on the pump (im no diy guy just wondering)

[suds window service]

how is the tank secured in the van steve?

[steve k]

no pressure on pump at all - comes out pole at 000ppm nice and strong with no problems with pump at all. If you wanted to change the configuration, it is simply a matter of changing a length of hose around.

The tank is enclosed in a metal frame bolted to the chassis. Installed by the cleaning warehouse.

[Blue Frog Systems]

Joe & Andys handy work

Had mine from the same place...

[SB Cleaning]

Joe & Andys handy work

Had mine from the same place...

Me too

I have to say it looks like they fitted mine better the hoses are a mess on that!!!!

[steve k]

you mean you have had 30 odd cable ties tied round the hoses!!

I took off the cable ties and shortened the hose runs and put them on quick release so I can take the system indoors in minutes to my static set up and/or protect from adverse weather.

the hoses are not a mess at all...very simple

feed in hose to first pre-filter -->(pressure gauge--solenoid)-->second pre-filter-->
nice short loop to RO--> 18" loop into tank lid (with 8ft length of yellow hose to waste stowed away)
--> then its a cable tied length from base of tank into pump--> DI cylinder--> a nice length of hose into hosereel to allow manoueverability of hosereel.

[Ste M]

steve you selling any work as well mate?

[steve k]

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250763318328&ssPageName=STRK:MESELX:IT