Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

mark311069

pump/controller problem
« on: May 03, 2010, 04:00:53 pm »
hi guys i have been given a pump and controller so gave it a try today. all ok there is a small delay from when i turn on the pole valve to the water coming out say 2 seconds but nothing i cant hadle. i then saw a button on the side of the controller so i pressed it and now it wont work. when i turn on the valve i get a small jet of water for 1 second but the pump wont kick in any ideas.
Logged

Window Washers

  • Posts: 9036
Re: pump/controller problem
« Reply #1 on: May 03, 2010, 04:02:56 pm »
Quote from: mark311069 on May 03, 2010, 04:00:53 pm
hi guys i have been given a pump and controller so gave it a try today. all ok there is a small delay from when i turn on the pole valve to the water coming out say 2 seconds but nothing i cant hadle. i then saw a button on the side of the controller so i pressed it and now it wont work. when i turn on the valve i get a small jet of water for 1 second but the pump wont kick in any ideas.
what controller is it ? what pump is it? can you upload a pic if you dont know the answer..

Hard to help you if we dont know what product your talking about.

Ian
Logged
If your not willing to learn, No one can help you, If you are determined to learn, No one can stop you ;)

mark311069

Re: pump/controller problem
« Reply #2 on: May 03, 2010, 04:37:25 pm »
controller . pump is a 60psi shurflo
Logged

Window Washers

  • Posts: 9036
Re: pump/controller problem
« Reply #3 on: May 03, 2010, 04:40:02 pm »
the button on the side is it a switch or a button ? I had one if these and mine was a switch (if it is that the problem turn it back on.

you can ajust them by unding the 4 screws and looking inside.
Logged
If your not willing to learn, No one can help you, If you are determined to learn, No one can stop you ;)

Moderator David@stives

  • Posts: 8829
Re: pump/controller problem
« Reply #4 on: May 03, 2010, 04:41:22 pm »
Turn off the dial,

Hold in the side button, at the same time, turn the front dial to about 2/3rds then release both buttons.

This should have now set your internal pressure.

now turn on and rotate the front button to the right speed.

Logged

Moderator David@stives

  • Posts: 8829
Re: pump/controller problem
« Reply #5 on: May 03, 2010, 04:41:46 pm »
Dont unscrew it there is no need
Logged

mark311069

Re: pump/controller problem
« Reply #6 on: May 03, 2010, 07:51:40 pm »
ok did as dave said and got it working but when pressing button in had to turn controller full on then release button and press it again and it worked ok. only problem now is i have a 3 second delay when i turn pole valve on and pump kicking in
Logged
Pages: [1]