[m.b.s.]

put new pole hose in 30ft pole  connecter y splitter turned water on to make sure no leakes from ez connector. noticed that on one side of y spliter water was comming out more than the other side so fitted new y spliter same thing
so connecter y splitter to brush one jet higher than the other the other jet was like it was spraying it out any ideas whats happening is my pump powerfull enoughth for 30 ft pole as its fine on my 20ft its a flojet60psi with 60 meters micro boreno veristream just flow tap and flow tap was on full

[Alex Gardiner]

Sounds like you've got some muck bunging up one of your jets?  Just a thought.  If it is, disconnect the hose from the back of the jet and try blowing the muck through or poking it with a needle.

[m.b.s.]

Sounds like you've got some muck bunging up one of your jets?  Just a thought.  If it is, disconnect the hose from the back of the jet and try blowing the muck through or poking it with a needle.

even if the brush is disconnected and the y splitter is on the end one side is higher than the other. tried a new y splitter  same happening
ps thanks for parts endcap fits a treat