Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

clive

  • Posts: 140
fluff
« on: December 02, 2004, 11:44:54 pm »
I am cleaning a nursery school carpet next week having cleaned it a year ago. The carpet is a short pile tufted polyprop and fluff just sticks to it like glue. I have a seb036 vac which hardly touches it and have also tried a rotowash contra rotating brush which doesnt pick it up either. The carpet cleans up fine but would look much better if I could remove some of the fluff!
Any Ideas?


Clive

Re: fluff
« Reply #1 on: December 03, 2004, 08:53:36 am »
Hi Clive

Try using a window cleeaners squeegy on a broom handle and rake the carpet when finished cleaning this will roll the fluff into a tube and you can lift it off the rubber squeegy reduces the static build up.

Best regards Nick

Neil Gott

  • Posts: 106
Re: fluff
« Reply #2 on: December 04, 2004, 05:43:37 pm »
A carpet pile brush can sometimes help loosen the fluff.

Fluff is a right pain. It is there on most carpets, but it shows up more on some than others.
Neil Gott     Southampton U.K.

www.neilgott.co.uk

Doug Holloway

  • Posts: 3917
Re: fluff
« Reply #3 on: December 04, 2004, 06:01:08 pm »
Clive,

Fluff is usually 'stuck' with a static bond.

It might be worth prespraying with an anti static treatment and seeing if that helps.

Cheers,

Doug

Dynafoam

Re: fluff
« Reply #4 on: December 04, 2004, 06:47:31 pm »
For neutralisation of static bond, the best pre-treatment would be a cationic surfactant such as Ultrapac Renovate (1:20 or even 1:30).

After a 15 minute dwell, a good treatment with the Host machine with white or zebra brushes would be my choice. One of the advantages of the Host is that there is a narrow gap between the brushes where the fluff collects, whereas the Sebo Duo has brushes that are set further apart and the base-plate prevents the fluff entering the machine.

Bob Allen

  • Posts: 523
Re: fluff
« Reply #5 on: December 05, 2004, 04:57:59 pm »
Clive, Ive agot a hover mower you can borrow! :D
Bob Allen

1aacclaim

Re: fluff
« Reply #6 on: December 05, 2004, 05:36:37 pm »
Clive,

Try using a new wire brush by gently combing the pile. or try a lint remover (double sided celotape on roller)


Terry

Kinver_Clean

  • Posts: 1120
Re: fluff
« Reply #7 on: December 05, 2004, 06:31:50 pm »
A little while ago I saw a gadget to remove dog hair from car seats. It was a bit of 18 tooth per inch hacksaw blade about 4" long set in a wooden handle like a grouting tool. Being a tight so and so, I made one which works very well in the car and also on carpets with ingrained fluff from the back of certain types of rug.

Trevor
God must love stupid people---He made so many.

clive

  • Posts: 140
Re: fluff
« Reply #8 on: December 05, 2004, 09:02:44 pm »
Thanks for all your replies.
I will pick up your mower next week if that is ok bob!! ;)
Good to see you on the board Terry...
Clive