[m.b.s.]

good luck you arehaving more than me i feel as if i have hit a brick wall oh well have a look again prob at weekend se what i can do in the bl88dy van yes put a post up for me tommorow tell me how you get on cheers m8

[windowwashers]

good luck you arehaving more than me i feel as if i have hit a brick wall oh well have a look again prob at weekend se what i can do in the bl88dy van yes put a post up for me tommorow tell me how you get on cheers m8

luck is not looking down on me at the mo, will post detail tomorrow night

[mike richardson]

ive just done mine it cost £53.95 + £7.50 post & package from a boat chandlers the number is 01353663095 he sent it the next day by courier,

i was told that i need a polyurethene roller, cud i find 1 cud i not after 6 days searching phoning etc

so i just painted it on 2 coats 1 at 7pm  then 1 at 6.30am the next morning,

its a transit swb had a sml amount left from 4 ltrs.

it still stinks now 1 week later,

floor was rubbed down with med grit sandpaper

then wiped clean with water then left to dry

dnt use white spirit to prep the area it reacts with the paint then stops it curing,

just buy cheap brushes then throw each 1 away after each coat its cheaper than buying the thinners,

[windowwashers]

ive just done mine it cost £53.95 + £7.50 post & package from a boat chandlers the number is 01353663095 he sent it the next day by courier,

i was told that i need a polyurethene roller, cud i find 1 cud i not after 6 days searching phoning etc

so i just painted it on 2 coats 1 at 7pm  then 1 at 6.30am the next morning,

its a transit swb had a sml amount left from 4 ltrs.

it still stinks now 1 week later,

floor was rubbed down with med grit sandpaper

then wiped clean with water then left to dry

dnt use white spirit to prep the area it reacts with the paint then stops it curing,

just buy cheap brushes then throw each 1 away after each coat its cheaper than buying the thinners,

have to ask did you dab or roll ?

[mike richardson]

dab  then brush out very lightly in long strokes in all directions ring me if you get stuck.i thought it was gona be  a real pain but its not really 07977975880

[windowwashers]

dab  then brush out very lightly in long strokes in all directions ring me if you get stuck.i thought it was gona be  a real pain but its not really 07977975880

will be doing it in the morning, I am going to paint cracks etc then roll, if I come across a problem will give you a bell, thank yuo for the offer even if I dont take it  soon see how I get on I guess cant be as much of a pain in the a== as ply lining  :

[mike richardson]

dnt use a standard roller sleeve becouse the glue that holds the sleeve on will react with the protectacote so i was told by the fella that sold me it

[oliver collins]

A quick thought to M.B.S i had two combos and i protectacoated both of them due to fact that their is a step down into the cab from the back of the van you must make sure you seal all the edges all the way around the back of the van and across the bulkhead needs extra attention if you dont then water will flood into the front of the cab belive me it is worth spening time sealing it all up properly.
Oliver Collins