[zesty]

How about putting a metal frame around the tank but elongated to the rear and with a cross member that would sit 'behind' the wheel arches?

So looking from above the leading edge of the frame would extend to behind the door pillars and the tank leading edge against the bulkhead; then a long support each side of the tank with a cross member at the back of the tank and a final cross member at the rear behind but up against the wheel arches?

Also strapped down.

Could do, but that would take up a lot of room, I have loads of gear in the back of my van, the gutter vac, pressure washer, softwash machine and other bits and bobs are often on rotation.

[KS Cleaning]

How about putting a metal frame around the tank but elongated to the rear and with a cross member that would sit 'behind' the wheel arches?

So looking from above the leading edge of the frame would extend to behind the door pillars and the tank leading edge against the bulkhead; then a long support each side of the tank with a cross member at the back of the tank and a final cross member at the rear behind but up against the wheel arches?

Also strapped down.

Another consideration I’m having, with the footprint/weight of the battery pack (around 400kg?)being pretty much where the footprint/weight of the tank is (in my case 550kg when full) will this affect the structural integrity of the van?

[Splash and dash]

How about putting a metal frame around the tank but elongated to the rear and with a cross member that would sit 'behind' the wheel arches?

So looking from above the leading edge of the frame would extend to behind the door pillars and the tank leading edge against the bulkhead; then a long support each side of the tank with a cross member at the back of the tank and a final cross member at the rear behind but up against the wheel arches?

Also strapped down.

Another consideration I’m having, with the footprint/weight of the battery pack (around 400kg?)being pretty much where the footprint/weight of the tank is (in my case 550kg when full) will this affect the structural integrity of the van?

I very much doubt it would affect it as they are designed to carry weight but wouldn’t hurt to ask the dealer

[zesty]

How about putting a metal frame around the tank but elongated to the rear and with a cross member that would sit 'behind' the wheel arches?

So looking from above the leading edge of the frame would extend to behind the door pillars and the tank leading edge against the bulkhead; then a long support each side of the tank with a cross member at the back of the tank and a final cross member at the rear behind but up against the wheel arches?

Also strapped down.

Another consideration I’m having, with the footprint/weight of the battery pack (around 400kg?)being pretty much where the footprint/weight of the tank is (in my case 550kg when full) will this affect the structural integrity of the van?

Defo no problem mate, no way would the chassis/van floor flex anywhere near enough to cause issues with the battery

[KS Cleaning]

So looking at tanks now, my present tank is an Enduramaxx 500 litre upright and very happy with it, it’s very well made and there is no water sloshing at all, so if I’m buying a new tank I would prefer another Enduramaxx tank. Looking at the Enduramaxx 500 flat which would be better for ratchet strapping but they would want £180 to deliver it to Scotland😲. Just wondering if I should ratchet strap my current tank? dimensions are L1200 W500 H1100

[windowswashed]

With these ev vans are they restricted to 60mph on motorways the same as HGV's as they are over 3.5t?

[KS Cleaning]

With these ev vans are they restricted to 60mph on motorways the same as HGV's as they are over 3.5t?

The  Transit Custom is 3.25t.