[STEVE-UK]

Looks good, does the frame have a casing or left open as in video

I think this has been asked before... can it be left on over night to stop system for freezing

It comes as an open frame due to being a retrofit item , you can box it in once fitted up

You could leave it on low overnight yes , I just run mine for a couple of hours at about 75% heat before bed , this usually gives enough heat in the tank to act as a big radiator

Ok great, can the system turn itself off automatically after 2 hours?

ideally we need a system that can be set on defrost setting, is this an option with this system?

Our employees take the vans home, so need to set it and leave overnight

[P @ F]

They don’t come with a frost stat setup like a Grippa or the like , but they do have a timer you can set to come on and off overnight , however in order to use this the water pump would have to be left on all night as the heater cannot turn the water pump on by itself !
This is why I just do it manually  2 hours before bed as and when I see a cold snap coming , again this is dependant if you can rely on the workers remembering to turn them off !

[NWH]

I might buy 1 they look good how much again all in

[Tristan R Clean]

Hi P&F

Well done for persevering with this project.
I have a few ?s

I run as a single operator .
I run a pump on full bore ( no varistream )
I use between 500 and 700ltrs a day.
What sort of temperatures would I expect at the brush head with your system?

Tris

[NWH]

At a guess I would say in the region of 35-45 degrees if you recirculate back to tank you will think you are getting very hot water but it’s only because the water in the reel is very hot,after about a few minutes it’ll cool back down.
If I do this with my diesel heater it get proper hot to hot to use tbh this time of the year.

[P @ F]

I might buy 1 they look good how much again all in

 

[P @ F]

Hi P&F

Well done for persevering with this project.
I have a few ?s

I run as a single operator .
I run a pump on full bore ( no varistream )
I use between 500 and 700ltrs a day.
What sort of temperatures would I expect at the brush head with your system?

Tris

Hi Tris , it’s hard to say , if you tell me what pump , bore and length of hose to use as well as what jets you use I can do a mock up and see , I may even know roughly already !

[dazmond]

I might buy 1 they look good how much again all in

why?you ve got a grippa system.....and you dont employ!

[P @ F]

I might buy 1 they look good how much again all in

why?you ve got a grippa system.....and you dont employ!

Exactly ...... I think Nigel is tempting me to advertise , not just inform 

[Tristan R Clean]

Hi P@F
This is what I use.

Grippatank
 HydroHeat™ 100m Reinforced Hose 6mm ID

Thanks
Tris

[p1w1]

Most importantly,  will this melt concrete?

[NWH]

I might buy 1 they look good how much again all in

why?you ve got a grippa system.....and you dont employ!

Don’t I

[Splash & dash]

Most importantly,  will this melt concrete?

Only if Nathan is using it 😂😂😂

[Frankybadboy]

.

I'd rather pay for a professional install myself but well done mate.you should be proud of yourself!

its a pity you didnt think like that when you had your tank fitted 

[P @ F]

Well the first system got fitted today for John of See Throo Southampton , went very well , no pics yet as John wants to do a few little bits first !
Cracking bloke as when we were packing up he told me he had a few bits I might want to make use of as I fitted free ...
Only went and gave me a box of carbon filters and an Xtreme 25 with loads of life left in it   
Cheers John you diamond

[nathankaye]

On that note, if you post these out, do we get a bag of sweets, a hat or is it a pen 

[P @ F]

On that note, if you post these out, do we get a bag of sweets, a hat or is it a pen 

The first 13 get a carbon filter 

[P @ F]

That’s one happy