Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Adam Daly

  • Posts: 12
Flow restrictions 4040 ro New
« on: November 09, 2018, 07:30:11 am »
Just bought a 4040 membrane and housing  but can’t seem to find anywhere that recommend the best flow restrictor or where to get. I assume I need one? Thanks

THANKS FOR INPUT PEOPLE!
Logged

Don Kee

  • Posts: 4900
Re: Flow restrictions 4040 ro
« Reply #1 on: November 09, 2018, 07:53:38 am »
Dont need a flow restrictor, use the gate valve I assume it came with (red* turny/twisty tap on the waste pipe)

*disclaimer, other coulours may exist.
Logged

david mark

  • Posts: 468
Re: Flow restrictions 4040 ro
« Reply #2 on: November 09, 2018, 08:30:01 am »
My gate valve has a 4mm hole drilled in the valve body
Logged

Smudger

  • Posts: 13459
Re: Flow restrictions 4040 ro
« Reply #3 on: November 09, 2018, 08:54:57 am »
Quote from: david mark on November 09, 2018, 08:30:01 am
My gate valve has a 4mm hole drilled in the valve body

Same here - altho I made it slightly smaller at 3.5mm - ex pure freedom set up but I like it as you have it open to flush and just close it to get the correct ratio of pure/waste. no measuring or adjusting the the gate valve

Darran
Logged
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Richard Groves

Re: Flow restrictions 4040 ro
« Reply #4 on: November 09, 2018, 10:18:46 am »
I have a gate valve as mentioned ( with no hole drilled ) plus a bypass pipe attached before and after via 2x t pieces and a second valve between them. Set the gate valve to optimum ratio and open or close the bypass to flush or produce pure.
Logged
Pages: [1]