Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: 1 [2]  All

johnny bravo

  • Posts: 2715
Re: Flow Rate
« Reply #20 on: January 09, 2015, 09:15:48 pm »
between 1  -  10.     i have mine on 4
Logged

the king

  • Posts: 1461
Re: Flow Rate
« Reply #21 on: January 09, 2015, 09:22:34 pm »
i have mine set at 57 i use the new micro pole hose frm aquadapter tho whth 2mm jets
Logged

kempy

  • Posts: 1442
Re: Flow Rate
« Reply #22 on: January 09, 2015, 09:44:51 pm »
Are you sure 57 is good , lol

Why not 60 or 55 ??
Logged

paul ette

  • Posts: 631
Re: Flow Rate
« Reply #23 on: January 09, 2015, 09:54:04 pm »
my last van 25 was good enough, new setup between 40 to 50, same pump and controller just comes out different, strange
Logged

oldman

  • Posts: 487
Re: Flow Rate
« Reply #24 on: January 10, 2015, 07:39:48 am »
Quote from: kempy on January 09, 2015, 09:44:51 pm
Are you sure 57 is good , lol

Why not 60 or 55 ??

Kempy...you need to ask 'Heinz' that question....Heinz went with 57 and seemed to work OK for them  ;D.
Logged

duncan h

  • Posts: 1875
Re: Flow Rate
« Reply #25 on: January 10, 2015, 09:10:29 am »
Normally about 60 to 70. Now with Vision 70 to 99
Logged

Window Lickers

  • Posts: 2196
Re: Flow Rate
« Reply #26 on: January 10, 2015, 09:32:19 am »
I use a 10lpm Vyair on full bore.
Logged
Quote from: C o z y on January 10, 2015, 05:01:20 pm
Liberace's ex looking to meet well built men for cottaging meets.

Window Lickers

  • Posts: 2196
Re: Flow Rate
« Reply #27 on: January 10, 2015, 09:33:54 am »
Quote from: SeanK on January 07, 2015, 08:04:10 pm
Quote from: chanster00 on January 07, 2015, 06:10:58 pm
Quote from: SeanK on January 07, 2015, 06:08:51 pm
You would be doing well to get 4.5 litres per minute from a shurflo pump even flat out.


so you think the shuflo pumps are pants too? sean

Nothing wrong with the pumps Chanster but by the time the water is pumped through the hose and brush jets
the flow will be reduced by a great deal.
I use the higher flow model I think its 7lts per minute and it gets about 4 litres per minute flat out.

You'll be spluttering out 2 - 2.5 litres per minute tops with a 7lpm pump. Measure it and see.
Logged
Quote from: C o z y on January 10, 2015, 05:01:20 pm
Liberace's ex looking to meet well built men for cottaging meets.

the king

  • Posts: 1461
Re: Flow Rate
« Reply #28 on: January 10, 2015, 10:11:42 am »
Quote from: kempy on January 09, 2015, 09:44:51 pm
Are you sure 57 is good , lol

Why not 60 or 55 ??
60 to mch splash bk 55 was perfect but now im using the micro hose frm aquadapter the flow needed uping a tad  ;D
Logged

SeanK

Re: Flow Rate
« Reply #29 on: January 10, 2015, 12:07:26 pm »
Quote from: Window Lickers on January 10, 2015, 09:33:54 am
Quote from: SeanK on January 07, 2015, 08:04:10 pm
Quote from: chanster00 on January 07, 2015, 06:10:58 pm
Quote from: SeanK on January 07, 2015, 06:08:51 pm
You would be doing well to get 4.5 litres per minute from a shurflo pump even flat out.


so you think the shuflo pumps are pants too? sean

Nothing wrong with the pumps Chanster but by the time the water is pumped through the hose and brush jets
the flow will be reduced by a great deal.
I use the higher flow model I think its 7lts per minute and it gets about 4 litres per minute flat out.

You'll be spluttering out 2 - 2.5 litres per minute tops with a 7lpm pump. Measure it and see.

Its actually not too bad I measured it a while back, I'm running at about one and three quarter litres per minute at the
moment tried the flow control up full and was getting about three and a half so I might get a bit more without the
controller.
Its also a five year old pump so that might slow it down a little.
Logged
Pages: 1 [2]  All