[Kevin Miller]

As the title says really how do you guys clean conservatories? I've now done 4 but each time I've always felt I've been missing a trick even though customers have been delighted. I don't use chemicals as I've not got the confidence yet. I use customer outside tap with gardiner clx water fed pole and Eco cover washing up liquid. What do you use? I'm tempted to go down the autosmart 101 route as Darren (smudger) has has some great results.

[tonycarr]

hi kevin....im really happy with the results using virosol

if you look at my backposts, post number 41 will give you some before and after images if your interested

tony

[Kevin Miller]

hi kevin....im really happy with the results using virosol

if you look at my backposts, post number 41 will give you some before and after images if your interested

tony

Thanks tony will do. What dilution rate do you us and how long do you leave it to dwell? Also do you use a sprayer to put it on or you WFP?

[david68]

Here is my link which i used the name in the title

http://www.cleanitup.co.uk/smf/index.php?topic=183915.msg1569673#msg1569673

[david68]

Here is my link which i used the name in the title

http://www.cleanitup.co.uk/smf/index.php?topic=183915.msg1569673#msg1569673

Also use virsol, but my some of my latest jobs i used a chemical called Strike by Selco building merchants

[david68]

Also use the quick attachments on your clx and make some of your own tools to snap on the end of the pole, i have even used a hard scrubbing nail brush to loosen some tuff grime.

Carbon pole are much better as they do not bend that much (25 slx does most).
My old clx is converted into a chemical sprayer connect to back pack so i can spray all levels of property from floor

[tonycarr]

hi kevin....im really happy with the results using virosol

if you look at my backposts, post number 41 will give you some before and after images if your interested

tony

Thanks tony will do. What dilution rate do you us and how long do you leave it to dwell? Also do you use a sprayer to put it on or you WFP?

hi kev...i must admit i went a bit OTT with a 50/50 ratio cleaning the conny in those images. you dont need anywhere near that ratio, im now using about 1/20 and still getting the same results.

i just use a garden sprayer leave to soak, not even 5 mins, i get really good results, for those areas i cant reach by hand i just spray directly on to the brush, again good results

tony

[tonycarr]

Also use the quick attachments on your clx and make some of your own tools to snap on the end of the pole, i have even used a hard scrubbing nail brush to loosen some tuff grime.

Carbon pole are much better as they do not bend that much (25 slx does most).
My old clx is converted into a chemical sprayer connect to back pack so i can spray all levels of property from floor

hi david...you got any pictures of that clx you converted?

tony

[david68]

Also use the quick attachments on your clx and make some of your own tools to snap on the end of the pole, i have even used a hard scrubbing nail brush to loosen some tuff grime.

Carbon pole are much better as they do not bend that much (25 slx does most).
My old clx is converted into a chemical sprayer connect to back pack so i can spray all levels of property from floor

hi david...you got any pictures of that clx you converted?

tony

No but will take some the weekend,

[tonycarr]

thanks david

tony

[Kevin Miller]

Thanks David I've ordered 5 litres of virosol and 5 litres of ubik from a website you linked on another post as they offered free deliver. £14 for both delivered not bad. So to clarify you would dilute virosol say 1/20 spray all over the conny with a standard pump sprayer and leave for 5 minutes then rinse of using a water fed pole. Does that sounds right?

[Rob@Blast off]

Where did you order from as that's cheap and I could do will some more.

[tonycarr]

Thanks David I've ordered 5 litres of virosol and 5 litres of ubik from a website you linked on another post as they offered free deliver. £14 for both delivered not bad. So to clarify you would dilute virosol say 1/20 spray all over the conny with a standard pump sprayer and leave for 5 minutes then rinse of using a water fed pole. Does that sounds right?

Yes that's right 1/20 ......that's still quite a strong mix so you could experiment using less

Let us know how you get on.

Tony

[Kevin Miller]

From here mate http://www.cjstore.co.uk bit confused though I ordered this morning and there was no delivery charge, I went to order some more and now they charging for delivery, looks like I landed lucky this morning