[windiewasher]

1) 3 blokes walked by whilst I was cleaning a house on a new estate yesterday shouting and then turned round and called me a lazy t-hat clean the old fashioned way.
Which I turned round and said you ffing what,i think they were window cleaners.

Wasn't impressed I wanted to gauge them with my pocket scraper.
2) Was cleaning a conny roof today and knocked the end spike off the roof.So gotta find a way of putting it back up,was just sat on,was loose but green so thought I would get it clean,
Whats the best way to put it back up???
Cheers all

[Ian101]

long pipe ..... length of rope thru pipe hooked / lassooed around spike ... place in position and release rope  

[dazmond]

windiewasher if you have an unger trad pole with a fixiclamp on the end that should do it!!

as for the other window cleaners just smile and wave!!CHILL MAN!!dont rise to em!!


best wishes


dazmond

[Dave Willis]

Beat me to it. You could quite easily use your pole with the same method.

[bobplum]

i used two poles and used them like chop sticks
bob

[SeanK]

Put it in the pole brush then rap the pole hose around it and pull the length back to hold
it tight put the spike in place and let go of the hose.

[elite mike]

is it the slot it one or screw on ?

if its the slot in one , i made a v shape in an old wooden fence section

the finial fits in the v shaped groove, you will need some steps or ladder   and a very steady hand  ;)go square on to the slot section on roof and just slide it back in and push gently.

[windiewasher]

Hi all thanks for great advice it is the slot one cheers all.

[ben M]

run forest,run! 

[H20cleaning]

Climb on the roof and put it back on 

[H20cleaning]

Climb on the roof and put it back on 

[Cliff perkins]

if u have a gutter vac i used that on 1 that i recently knocked off.
worked a treat
don't even need to have the vacuum on just use the silicone u bend and push it up that.

[windiewasher]

Climb on the roof and put it back on 

Stuff that i fell someones decking 2 days ago.lol