[PAUL ERITH]

Has anyone used this brush for residential what are they like to big or better for speed ??

im thinking about getting one and fitting 4  fan jets 

Thanks Paul

http://www.gardinerpolesystems.co.uk/acatalog/Wide_Xtreme_Brush_MM_350.jpg

[dave0123]

Been looking at this myself for a big job.. then use it on resi afterwards.

[scottt24]

Got one fitted with four 1mm pencil jets I use on factories and offices
Not used it on residential but don't see why not, it's very light and would make short work of patio doors

[jimiwindows]

iv got one very good on big glass.i dont do residential

[toronto]

I have had one since they came out but couldn't get away with it until last month when I fitted the smaller pencil jets and I have started using hot water all the time now. I use it on everything now.it speeds me up a lot.

ps it's got 4 pencil jets fitted.

[PAUL ERITH]

I have had one since they came out but couldn't get away with it until last month when I fitted the smaller pencil jets and I have started using hot water all the time now. I use it on everything now.it speeds me up a lot.

ps it's got 4 pencil jets fitted.

What size pencil jet you got on the brush mate i think gardiner do three different sizes

Thanks Paul

[Mike #1]

Paul if you buy Clarkes 1mm welding tips of ebay they can be used as jets for Gardiners brushes they fit perfectly , Been fittint them to my brushes for about a year or so now . Mike

[toronto]

I have had one since they came out but couldn't get away with it until last month when I fitted the smaller pencil jets and I have started using hot water all the time now. I use it on everything now.it speeds me up a lot.

ps it's got 4 pencil jets fitted.

What size pencil jet you got on the brush mate i think gardiner do three different sizes

Thanks Paul

I use the 1.2 mm jets I was using the 3 mm jets but wasted loads of water and find the smaller ones perfect for my needs.

[David Kent @ KentKleen]

Used the extreme mixed wide one for 6 months resi work, excellent IMO, when it wears a bit you can just cut it down inch by inch.