[Erithwc]

Im geting some Protecta-Kote Anti Slip Paint from purefreedom for the weekend whats the best roller to use

i have looked on screwfix but im not sure whats going to give the best finish

A rough finish would be better but what roller do you guys use for it i was thinking about a artex roller 

Thanks Paul

[richard jagger]

a LARGE HOLED TEXTURE  SPONGE ROLLER WOULD BE BEST.

[Erithwc]

a LARGE HOLED TEXTURE  SPONGE ROLLER WOULD BE BEST.

thanks for the reply mate just looked on wcw and they have a picture of blue 4"v rollers on their will have to go B&Q friday 

Thanks Paul

[t8ycs]

I had the Protecta-Kote kit from PureFreedom - if that's what you are getting, there is already a roller with it.  It worked fine.

[Window Washers]

Im geting some Protecta-Kote Anti Slip Paint from purefreedom for the weekend whats the best roller to use

i have looked on screwfix but im not sure whats going to give the best finish

A rough finish would be better but what roller do you guys use for it i was thinking about a artex roller 

Thanks Paul

http://www.diy.com/nav/decor/decorating-sundries/painting-and-decorating-tools-accessories/brushes__rollers___pads/-specificproducttype-rollers___accessories/B-and-Q-Fine-Finish-Textured-Pile-Sleeve-9-Inch-9371256

use this will be fine, get some gloves also as this stuff will stick to your hands, not only will you look like a smurf scrubing it off with how water fed to hurt a little 

dip said roller into tin (5l) and roll no need for a paint tray do not leave this stuff for an hour uncovered it sets hard on brushes etc quite fast. if your going to leave it, get a plastic bag and wrap it up with it try to get out as much air as possible.

this stuff gets you high, so well vented air if you don't like that feeling.

p.s dont use cloths you want to wear again as this stuff does not wash out 

[matty72]

i used a brush mate worked fine

[Window Washers]

i used a brush mate worked fine

to slow, way to slow I did that on my first van, now brush edges, drip said roller in said pot and roll easy peasy.

SOD brushing a whole van floor again I was up in the clouds with lucy

[Erithwc]

Thanks for the replys texture roller it is then i will see if i can get a 4" one im going to do one coat friday second coat saturday then its got loads of time to dry before monday i will put some pictures up once its done 

[Window Washers]

Thanks for the replys texture roller it is then i will see if i can get a 4" one im going to do one coat friday second coat saturday then its got loads of time to dry before monday i will put some pictures up once its done 

be prepared to have a stinky van for about a month  its smell nice though

[Erithwc]

Thanks for the replys texture roller it is then i will see if i can get a 4" one im going to do one coat friday second coat saturday then its got loads of time to dry before monday i will put some pictures up once its done 

be prepared to have a stinky van for about a month  its smell nice though

I could setup a side line business £5 a  sniff to the local drugie's