Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

clearviewwc

help with pump/vari ????
« on: February 19, 2012, 02:46:46 pm »
Ive been trad for 25 years but am making the switch to wfp as ive fallen off twice in that time and ended up in hospital both times. Ive bought a van and everything else I need for wfp. Today was the practice on my own house day before doing a large ground floor care home (100 windows) next week that i thought would be a good place to practice on. I connect to my 100m hose (6mm internal diameter) and turn on the vari (no 6 setting) to find it cuts out, flashing p and l. I thought it may be the battery so swop for one I know is fully charged, it still cuts out the same. I then connected to 8 meters of hose to see if maybe it couldnt handle 100m (no kinks, brand new, layed out fully on lawn) and was fine with 8m. But then i thought it surely couldnt be that it cant handle 100m as i know plenty that use it. I then bypassed the vari and found that the pump worked with the 8m, shooting water out about 4 meters. When used with the 100m the pump fuse (3amp) blew after a few secs. I replaced with a 5amp and it worked ok but only came out of the end about 1.5 meters which doesnt seem much at all. The pump isnt new, was bought with the van and was left out in the freezing weather unused for a month before i bought it (i couldnt see it working as everything in van frozen). Im assuming that it is a problem with the pump but as i know nothing about them in wfp use i thought i'd ask the pro's. Or is it that 100psi shurflos dont work with 100m lengths of 6mm internal diameter hose? Thanks  for looking/replies.

CLEANCARE WC

  • Posts: 4454
Re: help with pump/vari ????
« Reply #1 on: February 19, 2012, 02:52:47 pm »
Mark Etting is your man for this  :-X

I think the p is the pressure shut off which needs adjusting but i dont have that type of controller, so sorry i cant help.
WE CLEAN BY FAITH, NOT BY SIGHT WITH WATER FED POLE WHEN WORKING AT HEIGHT.

steven ainger

  • Posts: 1953
Re: help with pump/vari ????
« Reply #2 on: February 19, 2012, 02:57:52 pm »
100psi shurflo pumps definetly work with 6mm microbore

steven ainger

  • Posts: 1953
Re: help with pump/vari ????
« Reply #3 on: February 19, 2012, 02:59:39 pm »
Also, the pump should have a 10amp fuse

Deangsi

  • Posts: 663
Re: help with pump/vari ????
« Reply #4 on: February 19, 2012, 07:46:35 pm »
If its squiting 1 meter out the end of the pole that is good going and a strong pumo in my opinion. I have my water comeing out about 2 feet and thats plenty  ;D

Dave Willis

Re: help with pump/vari ???? New
« Reply #5 on: February 19, 2012, 07:52:28 pm »
You may need to increase the pressure setting of the controller. Pump pressure switch is normally disconnected too.