how much you selling the Zeta for?
also, how much are the pumps? for when they go.
thanks
tony
I can supply a service kit for the pumps which include all the seals etc for about £35.00+VATi have repared a few machines with leaky pump seals and both machines were quite old with quite a few hours clocked up!
Having worked on Karcher HDS601 machines i would say the Zeta is a piece of cake, no electronics, all mechanical
Just how the old school Karchers were.
Every part on the Zeta can be replaced including the plastic cover, if this machine is going to be running at 400psi rather than flat out at 1500psi im sure it will offer many years of reliable use.
Please note that the machine only weighs 63kg and can be easily moved out of the van with the extraction machine
I find this to be the best method especially if the customer has an outside tap.
The magma looks like a good piece of kit and would work well in situations like hotels and up in tower blocks... all the places where a TM is useless.
In order for the water to be as hot as possible i would run the magma in the same room as the wand with a shorter solution hose joining them
I doubt the magma would be able to offer maximum temp at 400psi... the water flow would pass way too fast through the heat exchanger.