[Pure Glass]

I've got an SLX30 and the forth lever thread has had it

The pole spins and won't clamp shut

What can I do as a temporary measure?

I've ordered spares from Gardiners today, but I'm up against it for tomorrow.

Lesson learned-always carry spares and don't be tight!!

Ta, Steve

[Smudger]

Are you talking about the plastic barrel thread ??

If so you could go up a size in bolt and make it cut a new thread ( sorry cant remember what size the original is )  OR find a local engineering shop who could re - thread the barrel with larger thread or Helicoil the thread so you can use the original bolt

Darran

[Pure Glass]

Thanks Darran.

Yes mate, its the plastic thread. Its the 4th clamp, so its pretty frustrating trying to do toen houses like the ones I've got tomorrow

Thanks again

[Dave Willis]

Take the lever and nut off the base section and take the base section off, put the lever and nut on the duff one and use the pole as a twenty five footer 'till the spares arrive.

[Pure Glass]

Thanks Hydro

I need the full 30ft really, so might have to shift some work around

[Dave Willis]

You might be able to get another half turn or more with a pair of pliers or mole grips on the bolt. It will chew the plastic finger adjuster a bit but might get you going. Unless the barrel nut is completely stripped.

[Tom White]

And don't overtighten your slx nuts; they only need a tweak when they're loose.