[shine services]

Hi all, I have a customers 48 linen chairs to clean, severly water damaged. Iv hwe to no avail and try 1 application of fiber shampoo, fibre buuf and oxibrite wich made a big difference bitwater marks are still very noticablke, any suggestions or tips toi getthe best possible results? I was thinking of just repeating the foam application method several times

[Jim_77]

If it doesn't work the first time, don't keep on doing it

Have you tried browning prescription?

With those other products already in the fabric, I'd rinse them out (might need a bit of de-foamer in your tank).  I would partially dry off, and then apply browning prescription at 1:3 (already moisture present so don't need to dilute it down that much).

I'd try that on just a few chairs first as a test, so you don't waste any more time/money if it doesn't work.

[shine services]

Yeh tried it before using the foam. It helped abit but I think I'm beat on this 1

[Paul Evans]

Linen Forget it,
This fabric needs to be wet allover at the same time.
Or water marks occur.
According to my latest training


Paul

[Ricky M]

they need to be recovered

speak to the bod miter-gating the loss and ask if you can deal with getting them re covered ?

[shine services]

Linen Forget it,
This fabric needs to be wet allover at the same time.
Or water marks occur.
According to my latest training


Paul

Spot on, water marking does occur unless the fabric is wet allover, even then the brown outline is visible around the very edge of the seats

[markpowell]

If they are white, try tippex or emulsion.