[Nameless Drudge]

I am hoping that people running hot water successfully might say which hose they are using on the reel, size/make and any pitfalls expected, such as avoid 40 degrees C or more or run it at a good bit lower temp or maybe go to 50 C no problems
      If i install the immersion element i have and am running hot through the resin is there a limit on the temperature before the resin starts malfunctioning or even going awol?
                   And lastly,do the pro hot systems(pure freedom etc) out there heat the water after the DI stage and avoid any problems the heat may possibly cause?

[darren clarke]

the ionics system have to settings Winter 75degrees & Summer 65 degrees.

i am using my immersion at 45 ish  as i use to use the hot water from my tap and that was 65 and had no probs,  i just want the water warm rather than hot

[stevenpaulmatthews]

we have been using our thermopure at 78'C with ionics new orange 8mm isd and it bloody great stuff and its only 60 quid

we have 1 reel with ionics orange hot water hose on it and 1 reel with wcw cold water hose on it and the both of the perform exactly the same

[niceandclean]

We use microbore from Streamline and Gardiners, never had a problem with either. The Gardiners hose is about 4 years old now.

[tomy jackson]

have a look at my  post on hot hose