[shaun lord]

Hi chaps,
i have a promount 25 and not sure if i have a big problem, there is water coming out of one of the exhausts, proberbly about a litre a minute.
the machine is about a year old and have done 400 hours.

shaun

[nevil]

Is your waste tank full. Most machines have a float operated switch to cut the engine when the waste tank fills. but they can get stuck meaning the blower will pull waste water through.

When you say one of the exhaust I can only assume that your machine has separate ones for the blower and engine. I would also assume that each of these exhausts has a heat exchanger to warm the water. I guess its could be one of these is a goner. 

[shaun lord]

Hi Nevil,
thanks for the reply, the wast tank is empty, yes there are two heat exchangers on the unit, just going to take it off and have a look
shaun

[jon barnes]

Hi
Give David Ingram a ring - he has a 25  - he might be able to advise or help 07947470307

hope this helps
Terry

[shaun lord]

thanks guys, sorted it, took the back of the h/e box off, started it up and you could see the leek on the conection, ptf tape, tightened up and its sound.
Thanks again.
shaun