[Ajpick]

I cleaned a curry house last night that hadn't been cleaned for 3 plus years. Duo was put through the mill and needs a really good clean. Does anyone have any tips to do this? Thanks

[M.Acorn]

I use an old fork,pushed into the brushes with it turned on,be careful though as it can snag ,then take out the brushes and wash them in a bucket,and clean the bit where the brushes go out,dry off and put back together 

[derek west]

take out brushes and use a fork and scissors and a lot of elbow grease, thank fork them days are behind me.

[Ajpick]

Thanks for the replies, how do I get the brushes out? Sorry if thats a silly question. Thanks again.

[derek west]

undo screws on bottom, lift of securing caps, lift and then slide out brushes

[Len Gribble]

Turn it over so the brushes are facing you. From memory there are two Philip screws on each cover holding the brushes in undo them lift the covers off, pull out the bushes (when I had mine I pw them)

[kinder clean]

Its a good idea to swap the screws for stainless ones as the std ones rust and can be a nightmare to get out ( speaking from experience )

Paul