[peekeclean]

hi all i have a ro-man 300gpd ro with booster pump,it was set at about 60psi when i got it but someone on here(i think alex) said you can run it safe at 100psi so i have been.
Now on ebay someone is selling them at 125psi is this ok??
dose anyone run there one higher?

thanks joe

[Frankybadboy]

not safe to run at 125psi as the joints on the ro systems start to give up and leak.

[Sapphire Window Cleaning]

I have a 125psi booster pump on my ROman RO unit at its fine.
The john guest fitting on the waste pipe will release any pressure higher than that.
Craig at Polarbrite as booster pumps in complete with john Guest fittings.



Matt

[Sapphire Window Cleaning]

If you have a look at the label on the membrane housing it states not to exceed 125psi.




Matt

[peekeclean]

hi matt so if you run your ro at 125psi what dose it knock your tds down to and from what? is yours the 300gpd like mine?
And how long have you had it at 125psi?

thanks joe

[peekeclean]

So at 100psi is ok as im sorting a friends ro out at the weekend and wanted to make shore that was the norm as its along time ago i did mine.

thanks joe

[Sapphire Window Cleaning]

hi matt so if you run your ro at 125psi what dose it knock your tds down to and from what? is yours the 300gpd like mine?
And how long have you had it at 125psi?

thanks joe

Joe I have the 500GPD RO and waste is usually 780, Tap water 380-390
after RO it is 018
I am producing about 60litres per hour.




Matt