[Mist A Bit]

i have a varistream with a 100psi shuflo van mounted. i`ve notived over the last few days that when i turn off my flow valve the pump is not cutting out and carried on today untill the hose conected to the pump burst. is this a common fault and does anyone know a reason why this is happening. it`s quite a new pump and controller as i`ve only set the system up a little over two weeks ago. any help would be great

thanks steve

[R W C™]

This might be due to the pressure switch or is it a digital controller.

[ftp]

Mine did that once - turned out it was the battery about to give up.

[Mist A Bit]

This might be due to the pressure switch or is it a digital controller.

its digital, doesn`t have the pressure swith as the controller bypasses it

[dai]

The pressure switch should be disconnected anyway.
The digital Varistream sometimes loses it's settings, you need to reajust it, select a lower cut off point, try the letter B.

[Mist A Bit]

Mine did that once - turned out it was the battery about to give up.

you wouldn`t think the battery wounld do that but my battery is an old one im using to get me started so might change it soon and see what happens

[Mist A Bit]

The pressure switch should be disconnected anyway.
The digital Varistream sometimes loses it's settings, you need to reajust it, select a lower cut off point, try the letter B.

ok thanks will give that a try before i set out in the morning

[ftp]

Apparently the sensor can play up a bit on a nearly dead battery and so doesn't tell the pump to stop. Jeff1 is the man to talk to. Try Dai's solution first - it's the cheapest 

[dai]

The pressure switch should be disconnected anyway.
The digital Varistream sometimes loses it's settings, you need to reajust it, select a lower cut off point, try the letter B.

ok thanks will give that a try before i set out in the morning

Let us know how you get on.

[Mist A Bit]

just letting you know i`ve sorted the problem, the battery was in need of a charge (the low batt indicator never told me) and the controller is now shutting the pump down, i`ve also lowered the shut off settings to be on the safe side.

thanks for your help 
steve