Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

karygate

  • Posts: 694
Re: WFP and 'mould growths' in water tank
« Reply #20 on: November 04, 2008, 07:22:48 pm »
it is the coconut resin finisher thats the difference between drinking water ro,s and ours apparently, someone told me somewhere, never , or did i just dream it.
gary

ftp

  • Posts: 4694
Re: WFP and 'mould growths' in water tank
« Reply #21 on: November 04, 2008, 08:06:15 pm »
Although not a good idea to have too much algae in the tank i would think the strainer would stop a lot of it. Tends to grow on the tank walls then get washed off with all that sloshing about. Probably caused by working with the van doors open unless your holding tank is exposed to daylight too.

Mike 108

  • Posts: 650
Re: WFP and 'mould growths' in water tank
« Reply #22 on: November 04, 2008, 08:18:05 pm »
Yes - the tank is exposed to daylight. If I cover it, will that stop algae forming?

CLEANGLASSUK

  • Posts: 738
Re: WFP and 'mould growths' in water tank
« Reply #23 on: November 04, 2008, 08:20:12 pm »
DONT DRINK THE WATER OR COULD END UP LIKE THIS!

Re: WFP and 'mould growths' in water tank
« Reply #24 on: November 04, 2008, 08:20:29 pm »
Yes - the tank is exposed to daylight. If I cover it, will that stop algae forming?
it is the sun that does it, you need to block all sunlight m8, you look at a pond with no UV filter and it will be green (same thing)

Wayne Thomas

Re: WFP and 'mould growths' in water tank
« Reply #25 on: November 04, 2008, 08:36:44 pm »
If the water in the tank did have legionellas disease in it, just think of the people who'd be inhaling the water mist carried in the wind on a gusty day whilst you're cleaning windows in public places ;D

Big Dave @ CWC

  • Posts: 95
Re: WFP and 'mould growths' in water tank
« Reply #26 on: November 05, 2008, 12:12:20 am »
Hi. i had algae in my tank a while ago, caused by using a clear tank uncovered and exposed to the sunlight,

i just drained the tank out, blasted the algae out with pressure washer, refilled with pure water, then put a capful of miltons sterilising fluid to every 300L of pure water. (only the first time you refill after blasting the tank out) 

miltons will send the tds reading skyhigh,

but it did not mess with the cleaning, water still dried clear. dont ask me why it just did. never had any probs after that.   but you're in doubt, test it on your windows first(or just leave in tank overnight then drain it again :o)

i've since added the miltons fluid every 6 months(just in case) ;D

djhaydn

  • Posts: 157
Re: WFP and 'mould growths' in water tank
« Reply #27 on: November 05, 2008, 11:11:48 am »
hi all
im not here to tell you what leganaires is , but what i do know through the fire service is :- if water is left in a stagnant state for a while the spores of this disease will grow, hence we have to flush all taps out once a month on station if they have not been used, i think this would be the same with someone who purifies there water and it is left sitting for a while, like it does in my 1000 ltr tank.
as for drinking i would never drink out of the tank, but i have drunk it straight out of the di outlet,
as for the algae. i have just had this problem, i have been leaving the shed door open slightly and the sun had got to it hence sending the tank slightly green and tds reading up.
i have since, pressure washed it out and refilled the tank, tds is spot on, i was a bit concerned as to where all the slim in the tank had come from, may be the ghostbusters had been around on halloween...lol.
anyway thats it from me.
Haydn

Captain Scarlet

  • Posts: 3087
Re: WFP and 'mould growths' in water tank
« Reply #28 on: November 05, 2008, 11:44:20 am »
if you want to drink your water you have 2 options as I can see:

boil it either with a 12v kettle or with a water heater capable of 100c

or a uv filter ( what they use in space, kills all germs and bacteria ) there cheap and effective. you will need to connect it to the battery though, and prob need a voltage converter 240-12v
Ffenest ( est 2007 ) is a fully insured premium quality window cleaning service based at Llandderfel near Bala. All our work is guaranteed, rain or shine, year round.

dd

  • Posts: 2623
Re: WFP and 'mould growths' in water tank
« Reply #29 on: November 05, 2008, 01:05:53 pm »
Anyone tried painting their tank to block light penetration? Wondering about doing this but not sure which paint to use.

djhaydn

  • Posts: 157
Re: WFP and 'mould growths' in water tank
« Reply #30 on: November 05, 2008, 04:29:54 pm »
Anyone tried painting their tank to block light penetration? Wondering about doing this but not sure which paint to use.


why not go buy a metal shed from argos, a 1000 ltr ibc tank fit in perfect, keep the sun and fromt out,

djhaydn

  • Posts: 157
Re: WFP and 'mould growths' in water tank
« Reply #31 on: November 05, 2008, 04:30:49 pm »
sorry ment to say frost not fromt

dd

  • Posts: 2623
Re: WFP and 'mould growths' in water tank
« Reply #32 on: November 05, 2008, 06:07:51 pm »
Anyone tried painting their tank to block light penetration? Wondering about doing this but not sure which paint to use.


why not go buy a metal shed from argos, a 1000 ltr ibc tank fit in perfect, keep the sun and fromt out,
Mean tank in van. Tank in garage is black, van tank is 10mm polypylene but still get small amount of green growth.