[Sure Cleaning]

I have a Freedom Trolley (old style) and need 2 new wheels...tried emailing supplier but get no response, just wondered if any one knew of a supplier for these wheels.

I have tried all local hardware shops and searched the internet but these particular wheels seems hard to find!!!

Any help much appreciated.

Steve G

[johnny_h]

i thought screw fix did them ? i might be wrong if they are punctured ATS will mend them but will charge or just fill them with that tyre foam stuff

[Bobs Window Cleaning]

I think they are wheelchair wheels.....hope that helps.

[Slash]

Try Ebay

[jeff1]

Try these, there is a 10'' wheel and tyre top right.

www.northerntooluk.com/main.asp?category=Tyres%2Fwheels%2Fcastors

[Sure Cleaning]

Thanks guys for all suggestions...still can't find wheels to fit!!!


Replacement tyres/inner tube no problem to find what I need is the actual wheel with bearings, the problem I am having is the bore hole size is 20mm and the bore hole length is 56mm.  When I've searched I can find a 10" wheel with a 20mm bore hole but the bore hole length is always around 75mm!!

I did try ebay and have emailed a supplier to see if he can help (thanks slash)

Have just looked at screwfix and northern tools still no joy...The northern tool wheel would be fine if bore hole 20mm and bore length was 55mm!!

Oh well I'll keep looking

[jeff1]

Have you tried google?
www.google.co.uk/search?hl=en&q=10%22+Pneumatic+Tyre%2Fwheel+&btnG=Google+Search&meta=

What's up with your old ones?

This is the closest I found.

www.northerntooluk.com/products.asp?partno=2278E

[Sure Cleaning]

Hi Jeff,

Tried google....no luck yet...they must be out there somehere!!!!

The bearings have gone on my old wheels.

Steve

[jeff1]

Hi Jeff,

Tried google....no luck yet...they must be out there somehere!!!!

The bearings have gone on my old wheels.

Steve

did you try the new link for northern tool I just posted above?
www.northerntooluk.com/products.asp?partno=2278E

[Sure Cleaning]

Hi Jeff,

Thanks. tried the new link...the bore length looks too long...I think I will email or call Northern tools to see if they have the specs i need.

thanks again.

steve g

[tonylee]

hi Steve,
when I had mine freedom had none in stock but I soured them from machine mart. Freedom did also say they had used a couple of different supplyers and different wheels though.
Tony

[Sure Cleaning]

Hi Tony,

Just looked at machine mart and those wheels could just be the right ones...they look like the ones I have so will give them a call to check bore length.

Many thanks.

Thanks to everyone for their help...very much appreciated.

steve g

[kris martin]

Thanks guys for all suggestions...still can't find wheels to fit!!!


Replacement tyres/inner tube no problem to find what I need is the actual wheel with bearings, the problem I am having is the bore hole size is 20mm and the bore hole length is 56mm.  When I've searched I can find a 10" wheel with a 20mm bore hole but the bore hole length is always around 75mm!!

I did try ebay and have emailed a supplier to see if he can help (thanks slash)

Have just looked at screwfix and northern tools still no joy...The northern tool wheel would be fine if bore hole 20mm and bore length was 55mm!!

Oh well I'll keep looking

where do you get the tryres and inertubes from i need some, had a couple of punctures lately..

[Sure Cleaning]

Hi Kris,

I get replacement tyres / inner tubes from local mobility shop. Also some hardware shops sell them.

If none near you try online ... google search 260 x 85 tyres should list some suppliers...

steve g