[lee_dewing]

anyone got one of these?
If so what are they made of?
how do you fix crank joint and brush to pole?

will make a harris pole but trouble is they only goto 5 metres

oh yeh where do yopu get bentley broom. can't find at tesco's
thanks all sorry not on net
Lee

[clean]

Lee you may be having trouble finding it as it`s spelt zensorflex (there`s an R in it),
try here www.rugbytackle.co.uk the 8m is £24.99
i think Jeff Brimble is your man to answer more question 

[lee_dewing]

thanks

[gary999]

go on the diy water fed pole site for advice to put it together
you can get a zensorflex for less than twenty quid from most
fishing tackle online shops

[john tomkins]

Glass fibre as far as I know.
Buy a broom thats got a plastic screw thread into the brush and remove it, find where it best fits the zensorflex diameter , somewhere on 3rd section I think, cut the pole and araldite the plastic screw thread in, attach angle adapter anb brush and you're done

[ftp]

Zensorflex isn't that long, you want the Gangsta for a longer pole or combine both for even more length.

[clean]

I would probably say that margin poles are the best poles to convert as they have slightly thicker walls and you can get the extensions to make them longer 

[matt]

min RT Zflex is now approaching its first birthday    i will make a post

h ttp://wfpole.110mb.com/

OR

h ttp://wfpole2.110mb.com

shows how its done, i allways connect a bit of unger pole to the end, that way i can attach a unger cone with the brush fitting, unger scraper and the gutter scoop

as for fixing a cracked joint, i just use superglue around the area, worked a treat

[prestigeclean]

emporium poles sell an extender with a screw thread on the end , it fits perfectly onto a zensorflex regards alan

[clean]

emporium poles sell an extender with a screw thread on the end , it fits perfectly onto a zensorflex regards alan

do you know what the internal diameter measurement is
cheers 

[prestigeclean]

will check for you later and post regards alan

[clean]

will check for you later and post regards alan

Thanks Alan,
i have just looked on their website and noticed they do 2 there`s one that just slips on the end that comes with the pole and also a short plastic threaded one in the accessories section that`s priced at £6.95

[Jeff Brimble]

It fits on the end of the No4 section Zensorflex and is about 22mmID just under 7/8"

It also fits over the unger no1 section, wrap some tape round to take up the slack.

The Zensor though glassfibre will not give you splinters.

King kong, Browning do a very good Margin pole its a 8m (bit expensive) but as you say you can get extensions.(the extension I bought and misused has gradually got splits) The Gangster also has the thicker fairly substantial composite 1.5mm walls
From memory alternating the sections of the Zensor and Gangster combined will give you a temporary height of 30-31ft not very stiff but ok when used vertical for the odd job. If you need to go higher get a 42ft  F16 for£249 or SL2 or Emporium Ultralight.

[prestigeclean]

the emporium extender measures approx 20mm internal and the other one measures 25mm approx hope this helps , i use the 20mm one on the end of the zensorflex regards alan

[clean]

the emporium extender measures approx 20mm internal and the other one measures 25mm approx hope this helps , i use the 20mm one on the end of the zensorflex regards alan

Hi Alan,
thanks for the info,i take it that the 25mm one is a threaded extender for the plastic adjustable neck by its picture and description