[LWC]

i hardly check mine, do you?

like once a month...cough if that sometimes

[Dean Aspects]

I am glad im not the only one its something that should be done regularly but with a tds of only 35 and using 2 di vessels it should last a long time
Off out to check it now that youve put it in my mind

[LWC]

lol, im like that, someone remidns me on here to go check

i have  tds of 050, running a ro that puts out 000 before resin!

[jeff1]

My 3 year old grandson reminds me I have to do it, every time I fill up he comes out with my TDS meter

[dmlservices]

lol, im like that, someone remidns me on here to go check

i have  tds of 050, running a ro that puts out 000 before resin!

why use resin if it is 000 before resin.

my tds is around 300 before, 004 after ro , and resin lasts ages, i have a inline before / after tds meter and change resin when it goes above 002. i have a seperate hand held tds and double check every so often
. i also use this to show custys difference between their water and mine 

daz

[LWC]

i thought that resin polishes it? i dont really know if you have to?

[Jimmy1]

Every Day

[dmlservices]

i thought that resin polishes it? i dont really know if you have to?

i think the 'polishing' refers to removing the final few tds from the water , in my case it is 004.


daz

[LWC]

oh...so that means i wold never have to buy resin again

[Wayne Thomas]

I checked mine the other day and I was shocked it was reading 31. Had to change it straight away. Luckily for me I keep 2 tiny 5L ones in the van to finish polishing off. Caught it just in time. Should check it more frequently as it's cheaper than losing customers and not being paid. :

[m.b.s.]

every time i fill my static tank through an inline tds and then a water sample with a hand held tds just checked mine and its flashing between 000-001 on inline and 001 on hand held  looks like i will have to change soon more money

[LWC]

001...mate up to 010 is fine

[peter holley]

iv had my ro for 2 years and i still get 004 , i use about 2000 ltres a week,  i still use a di  ,  filter on board , but my resin lasts ages....i hardly  ever check my tds, but i should check it every week :

[m.b.s.]

001...mate up to 010 is fine

its  just a rule i set my self when i first started out that if it reaches 001 i change it and i have stuck to it
i know you can use up to 010 but like i say its a rule  i set myself at least if its 000 any problems i get are my own fault operator erra