Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

[GQC] Tim

  • Posts: 4536
Re: 001 and spotting
« Reply #20 on: August 06, 2008, 12:04:27 am »
Even if you just do the glass??

Wayne Thomas

Re: 001 and spotting
« Reply #21 on: August 06, 2008, 12:37:07 am »
If it's aluminium frames leaving a dried white spotting when it's dried....remember to rinse brush off around the painted frames because the brush disturbs the painted coating.
IMO using hot water on these painted frames makes it a lot worse if rinsing brush on because I have tried it on the same problematic windows using both hot & cold water on different occasions with diferent results, cold water and rinse brush off works best. :)

peekeclean

  • Posts: 348
Re: 001 and spotting
« Reply #22 on: August 06, 2008, 05:40:12 pm »
changed the resin and the problem is gone, must be the meter not reading it right?

joe

BURNA

  • Posts: 3
Re: 001 and spotting
« Reply #23 on: August 06, 2008, 09:05:26 pm »
I have exactly the same problem with white dried spotting. Been using WFP for a couple of months and have NEVER got the windows as clean as i want them to be. This is using brand new resin too. Reading is 001.

Yes i'm new to WFP but is it really possible to get windows totally spotless with it?

macmac

Re: 001 and spotting
« Reply #24 on: August 06, 2008, 11:27:24 pm »
Ali frames, red vikan mono', no problem here. :D


[GQC] Tim

  • Posts: 4536
Re: 001 and spotting
« Reply #25 on: August 07, 2008, 12:42:19 am »
Ali frames, red vikan mono', no problem here. :D



Some ali frames have got no problems with oxidising at all.