[Captain Scarlet]

Hi Alex, I ve got a brodex 24ft pro long with a gooseneck





I dont want to use it anymore, but it has a non standard fitting on the end to recieve a brodex thread from the gooseneck. So what I was thinking of doing was buying one of these from you and cutting the pole under the fitting and gluing one of these fittings into accept a german d type thread



the problems I have are the following:

1.I will loose the hole where the hose comes out
2.Will your fitting fit the last section of the pro long?

How do your hose through fittings work? the hose goes through the thread but where does it re emerge to go to the brushes jets?Is there a hole in the angle adapter, so the hose can come out?

Thank you very much Alex, Luke

[Alex Gardiner]

Hi Luke

Alex is out working but he should be home late afternoon.  I'm sure he'll reply when he gets in.

Regards

Mrs A

[Alex Gardiner]

I'll email you Luke with the answer.

[Alex Wingrove]

its simple,

the tube runs through the pole, and then there is a 7mm hole in the screw on thing, tube goes through that, and then you have your plastic angle adapter with another angled hole in it, and the tube comes through that.

Any good?