Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Richardsons Clean

  • Posts: 37
CHANGING RESIN HELP???
« on: March 28, 2011, 04:34:11 pm »
EVENTUALLY ORDERED MY RESIN 2DAY(TRYIN TULSION RESIN),FROM WCW TODAY.1ST TIME IVE CHANGED RESIN.CAN ANYONE GIVE ME SOME TIPS OR INFO 2 MAKE THE JOB EASIER.ALSO WHAT DO U DO WITH THE OLD RESIN??CAN U BIN IT ???CHEERS.
Logged

♠Winp®oClean♠

  • Posts: 4085
Re: CHANGING RESIN HELP???
« Reply #1 on: March 28, 2011, 05:24:50 pm »
Bin the old resin.

Empty the vessel of old resin. Flush out with water. Fill with new resin to about 4/5ths full or just below the vessel shoulder. Then fill with water to just under the neck & insert riser tube/head.

BE VERY CAREFUL NOT to cross thread the vessel head!!!!! It may take numerous attempts to line it up correctly, but make sure you do.

Hope that helps. ;)
Logged

♠Winp®oClean♠

  • Posts: 4085
Re: CHANGING RESIN HELP???
« Reply #2 on: March 28, 2011, 05:25:54 pm »
Also, before you screw the head back on just make sure the thread in the vessel isn't full of resin beads.
Logged

Mike Calvert

  • Posts: 4
Re: CHANGING RESIN HELP???
« Reply #3 on: March 28, 2011, 05:28:59 pm »
There's a couple of 'how to' clips on You Tube for refilling resin, that's how i learned.

I use a traffic cone as a funnel  ;)
Logged

Llaaww

  • Posts: 2260
Re: CHANGING RESIN HELP???
« Reply #4 on: March 28, 2011, 05:32:49 pm »
Quote from: Mike Calvert on March 28, 2011, 05:28:59 pm
There's a couple of 'how to' clips on You Tube for refilling resin, that's how i learned.

I use a traffic cone as a funnel  ;)

I use a gutter hopper as a funnel.
Logged
if it is dirty it is fair game

Richardsons Clean

  • Posts: 37
Re: CHANGING RESIN HELP???
« Reply #5 on: March 28, 2011, 05:46:21 pm »
resin should be here 2moz will have a go,thanx 4 your help :)
Logged

GoodFella2006

  • Posts: 413
Re: CHANGING RESIN HELP???
« Reply #6 on: March 28, 2011, 06:27:03 pm »
I have a gutter cleaning this week.

I hope custy doesn't realize what is missing after the clean  ;D
Logged

Richardsons Clean

  • Posts: 37
Re: CHANGING RESIN HELP???
« Reply #7 on: March 28, 2011, 06:35:31 pm »
ha ha ;D
Logged

mrwindows

  • Posts: 31
Re: CHANGING RESIN HELP???
« Reply #8 on: March 28, 2011, 07:20:33 pm »
Logged

Your Choice w/c

  • Posts: 132
Re: CHANGING RESIN HELP???
« Reply #9 on: March 28, 2011, 08:47:03 pm »
Didn't know you had to put water in before putting top back on.Is this what i should do?
Logged

Jonny D

  • Posts: 136
Re: CHANGING RESIN HELP???
« Reply #10 on: March 28, 2011, 09:44:20 pm »
why do you have to put water in first?
Logged

bumper

  • Posts: 872
Re: CHANGING RESIN HELP???
« Reply #11 on: March 28, 2011, 09:45:19 pm »
I had same problem last week now its 0001,i put it down to letting it roll about in my car,i think you must have them stood upright,not rolling about
Logged

Llaaww

  • Posts: 2260
Re: CHANGING RESIN HELP???
« Reply #12 on: March 28, 2011, 09:49:02 pm »
Quote from: Jonny Dunlop on March 28, 2011, 09:44:20 pm
why do you have to put water in first?


It helps the resin to move about more easily so that the riser can push into the beads.
Logged
if it is dirty it is fair game

♠Winp®oClean♠

  • Posts: 4085
Re: CHANGING RESIN HELP???
« Reply #13 on: March 28, 2011, 10:48:18 pm »
Quote from: llaaww on March 28, 2011, 09:49:02 pm
Quote from: Jonny Dunlop on March 28, 2011, 09:44:20 pm
why do you have to put water in first?


It helps the resin to move about more easily so that the riser can push into the beads.

Spot on.

It makes it MUCH easier to get the riser tube back in & in line as the resin mass is suspended in the water. ;)
Logged
Pages: [1]