[DaveBrown]

Just about to fill my new vessel for the first time. Is there a special way of doing it or do I just pour it in? Does it need compacting or anything?

Thanks

David

[Easyclean Windows]

What size is your vessel David?

[alpha]

I find ladeling it in through a funnel helps you not too lose or waste any. they reccomend filling it to about 6 inches from the top if you use a 18 inch vessel

[matt]

i allways fill mine right to the top, give it a good shake and add some more after it settles

[DaveBrown]

Easyclean, Its 6 x 29 mate.

David

[DASERVICES]

  Wear some eye protection as well, when you are filling it they may be a small
  risk of some getting in your eye. Have had this happen to me so I always wear
  a pair of shades.

  For skooping out the resin from the bag use an empty plastic bottle, cut it down
  to size. Sheet of A4 paper I use as a funnel, works well with me.

  Doug

[Majestic]

I allways wash my vessel out first, then let it dry to make sure its clean and no old resin is left in .

[Jack Avery]

I cut the bottom off a plastic milk container and use it as a funnel.

[DaveBrown]

Thanks for the tips fellas.

David

[dai]

A cut down road cone makes the best funnel. Dai

[matt]

A cut down road cone makes the best funnel. Dai

and it can be used as a funny hat