[Ggh]

Got a gardiner #10 stuck in an #11. Don’t want to put it in a vice as I think it will break it.
Any tips  to aid release?
Guessing a bit of grit has got in between and wedged them.

[Don Kee]

Two people, one at each end, and twist in opposing directions.
Pour a tiny bit of washing up liquid where the two sections meet and leave it to get in the gap for a few mins before you do.

[DJW]

Wear rubber gloves so you don’t squeeze too tight plus more grip.

[Soupy]

Wear rubber gloves so you don’t squeeze too tight plus more grip.

That's what she said.

[Ascjim]

2 people, both pull and twist.

[LBWCS]

I heated the outer one with a gas burner briefly. Did the trick

[Ggh]

Cheers guys. I used the vice! Bloody tape bunging it up. Really don’t know why they put it on.

[M & C Window Cleaning]

I occasionally get a similar problem with the tape between sections #1 and #2 on my Xtremes. As there is much less tolerance between those two sections than the others, if the stop tape gets cut by some grit it comes apart in between the sections and jams at the clamps making the sections very hard to get apart for maintenance. So I replace it much more regularly between these two sections than the others.

[forest]

WD40 mate. One person either side and twist and slightly bend as you rotate it.