Does anyone know how to connect the remote to the v16 controller
Morning JK. Have you been able to pair the Fob to the controller ? If you have a Fob + Controller please see 
http://springltd.co/assets/uploads/content/V16_B.pdfIf you have the WFP Stand Alone please see 
http://springltd.co/assets/uploads/content/manuals/WFPL_SA_Standard.pdfThe connection between the Fob and controller uses a radio signal ( same as mobiles) On occasion the connection drops out, normally the connection restore automatically. If this has not happened please follow the steps below to reset the receiver 
1. Power off the controller
2. Pull the fuse between the fuse between the controller and battery 
3. Leave this out for 10 mins 
Replace the fuse and power up then follow the pairing process in the above guide 
If the Green LED on the Fob do not circle 
1.Check it is charged Or replace the Coin cell battery 
2. The Fob can be reset by removing the battery and leaving it out for 5 to 10 mins
3. Replace and repeat pairing