[johnny bravo]

i am looking for a heavy brass or  steel fitting for my large purefreedom tap   The screw in barb    blue fitting going into tap from PF for 350 and above tanks
This is my main leak,  the plastic  head  keeps loosing  its shape when  you turn with spanner.   Looking for a better quality one to fit in
Any one use different to blue plastic fitting
 of the PureFreedom Tap you fix onto your 500 ltr water tank

[johnny bravo]

what size thread will it be,       i know its for a 1/2 inch hose barb

[Bungle]

You are using PTFE tape on the threads I assume? I had one of those taps and it cracked at the elbow when I was tightening it to the tank thread. I now use a plastic elbow on the tank from Gardiners and an inline tap 6" further down just before the pump.

[Spruce]

1/2" bsp male to 1/2" hose barb.

https://www.advancedfluidsolutions.co.uk/brass-male-12-bspt-x-12-13mm-brass-hose-tail-fitting-1764-p.asp

PF say the fitting is for their 1/2" hose.

Pirtek behind B&Q in Portrack Lane will probably carry those.

The black fitting is a 1"bsp male to 1/2" bsp female reducer.

[johnny bravo]

thanks,      ill probably have one in my box of Many Wrong sized  bits ive purchassed over the years,     

[P @ F]

PF certainly like to overcomplicate things dont they , WTF is all that about