[Terry A]

I have a 40 inch membrane with pre filters and a decent booster pump
The  Tds after the membrane is still fairly low so it's not knackered.
I'm  getting 1 litre a minute with the pump running at about100 psi.
I'd be interested to know what everyone else is getting from a 40 inch R/O.

Thanks

Terry

[Spruce]

HF5 membrane, 4 1/2 years old, 50 psi tap water pressure, no booster, 2  x 20" prefilters one sediment and one Fiberdyne carbon block,   2 lpm pure with 2 lpm waste. Membrane running at 98% efficiency.

[Tony dunmall]

2   40x40. In line

Booster Pump

95% rejection at 60 keep 40 down the drain
We get about 450-500 litre an hour

After r/o it's between 003-008

Just had to replace  one today as it was over year old and tds was creeping up to about 18-25

[Terry A]

450 - 500 an hour is fantastic
Mine takes all day to do 500
Thanks for the replies
Where did u get ur system from?

[P @ F]

I must have the best system on here .....2 x 50gpd units not boosted 085 ppm in 000ppm out , giving me a whopping 300L in 24 hours , good job im lazy as i might have to buy a bigger one 

Rich

[Tony dunmall]

Hi terry

It's just a standard 40/40 from June at gaps water just one for better use with pressure

The booster pump I think most use is the clarks model, it sure which one  Gardners selll a similar one so do grippa



I use John guest fittings take pressure well, we have an out 14 window cleaners who Purchase water from us, so it needs to fill quickly