Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Tony Edwards

  • Posts: 791
ivy sucker removal help
« on: July 30, 2016, 01:09:23 pm »
Ok so tried this on fascia to remove ivy sucker marks:

Diluted hypo
Neat hypo
Brick acid
Low and high pressure jet washing
CIF and brush
Razor blade
Scourer
Sandpaper !

Any other ideas taking hours !!
Logged

chris scott

  • Posts: 3414
Re: ivy sucker removal help
« Reply #1 on: July 30, 2016, 02:05:44 pm »
Farecla G3  and a formica pad  maybe ?
Logged
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Smurf

  • Posts: 8538
Re: ivy sucker removal help
« Reply #2 on: July 30, 2016, 04:46:42 pm »
Blast the fook out out it with a turbo nozzle worked for me...yehaa!  ;D
Always best if yer going to use this methods is to make sure the property owner is not about though as is a very cowboy aproach but seems to work well enough.  Well that's until you start damaging stuff like plastic trim etc goes flying off.

Was not me honest guv  ;D ;D
Logged

Smurf

  • Posts: 8538
Re: ivy sucker removal help
« Reply #3 on: July 30, 2016, 05:03:57 pm »
Steam also works too  ;)

Any woody bits still tangled around the gutters or worked its way under sofitts, tiles etc really has to be removed by hand still.
Logged

Smudger

  • Posts: 13299
Re: ivy sucker removal help
« Reply #4 on: July 30, 2016, 05:13:58 pm »
Cheaper and easier to replace

Darran
Logged
A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty.

www.oddbodscleaning.co.uk

Smurf

  • Posts: 8538
Re: ivy sucker removal help
« Reply #5 on: July 30, 2016, 06:10:00 pm »
Maybe what you would charge to remove it might well be  ;D ;D

RUN Forest RUN!!! ... Some jobs are not worth the hassle for sure smudger ;)
Logged

Tony Edwards

  • Posts: 791
Re: ivy sucker removal help
« Reply #6 on: July 30, 2016, 06:16:29 pm »
Quote from: Smurf on July 30, 2016, 04:46:42 pm
Blast the fook out out it with a turbo nozzle worked for me...yehaa!  ;D
Always best if yer going to use this methods is to make sure the property owner is not about though as is a very cowboy aproach but seems to work well enough.  Well that's until you start damaging stuff like plastic trim etc goes flying off.

Was not me honest guv  ;D ;D

Tried turbo nozzle but no joy as there comes a point where you think its going to rip the thing apart !
Logged

Smurf

  • Posts: 8538
Re: ivy sucker removal help
« Reply #7 on: July 30, 2016, 06:40:32 pm »
Quote from: Tony Edwards on July 30, 2016, 06:16:29 pm
Quote from: Smurf on July 30, 2016, 04:46:42 pm
Blast the fook out out it with a turbo nozzle worked for me...yehaa!  ;D
Always best if yer going to use this methods is to make sure the property owner is not about though as is a very cowboy aproach but seems to work well enough.  Well that's until you start damaging stuff like plastic trim etc goes flying off.

Was not me honest guv  ;D ;D

Tried turbo nozzle but no joy as there comes a point where you think its going to rip the thing apart !

Try a steamer then instead as I know it works ok on plastics
Logged

Smurf

  • Posts: 8538
Re: ivy sucker removal help
« Reply #8 on: July 30, 2016, 06:46:47 pm »
Or if you happen to have a spare 7 ish k including a decent generator then one of these would work too.
https://www.restorative-products.com/products/thermatech

Sadly I don't so had to do part of a job with a vax steamer which seemed to take forever still.... I told you I was a cowboy   ;D
Logged
Pages: [1]