Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

laustin956

  • Posts: 20
mosmatic flat surface cleaner with vacuum recovery
« on: April 02, 2015, 06:02:50 am »
Hi just got a mosmatic flat surface cleaner want to get a vacuum cleaner for it what is the best sort to get looking for a 240v one. Thanks leigh

chris scott

  • Posts: 3414
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267


chris scott

  • Posts: 3414
Re: mosmatic flat surface cleaner with vacuum recovery
« Reply #3 on: April 02, 2015, 08:34:01 pm »
http://new.cleanitup.co.uk/smf/index.php?topic=193762.0
Wash, empty, wash, empty, wash...  u get the picture  :D

 I thought that was the whole point of a vacuum…to collect crap so you can empty and dispose of it.
Do you use yours differently?
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

Re: mosmatic flat surface cleaner with vacuum recovery
« Reply #4 on: April 02, 2015, 10:57:48 pm »
http://new.cleanitup.co.uk/smf/index.php?topic=193762.0
Wash, empty, wash, empty, wash...  u get the picture  :D

 I thought that was the whole point of a vacuum…to collect crap so you can empty and dispose of it.
Do you use yours differently?
as you may or maybe not know whilst cleaning block paving and recovering you will collect a lot of silt, how do you empty this silt from you vacuum ?

chris scott

  • Posts: 3414
Re: mosmatic flat surface cleaner with vacuum recovery
« Reply #5 on: April 03, 2015, 05:31:02 pm »
It has a slurry pump built into it….that will handle certain sized solids.
That or fill individual barrels (lightweight plastic) http://www.bigbrute.co.uk/accessories/4222/interceptor-lid-(205ltr-open-drum).htm
I do not think i have every removed more than 200litres of slurry from a job anyway. Usually only a few bags or buckets .
The water can be separated and pumped into a foul water drain or verge. Or even filtered and used again in the pressure washer.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

rah

  • Posts: 670
Re: mosmatic flat surface cleaner with vacuum recovery
« Reply #6 on: April 03, 2015, 05:44:02 pm »
I've got a Omni-vac that has a built in pump to empty it, never used the pump as I only use it for gutters. Remember the guy saying it can only pump out or vac in, due to power supply. Whether this is something that could be sorted, I don't know as I've never looked into it.
Life used to be full of up's and downs....now i hardly ever get up a ladder :) .

Re: mosmatic flat surface cleaner with vacuum recovery
« Reply #7 on: April 03, 2015, 05:45:11 pm »
It has a slurry pump built into it….that will handle certain sized solids.
That or fill individual barrels (lightweight plastic) http://www.bigbrute.co.uk/accessories/4222/interceptor-lid-(205ltr-open-drum).htm
I do not think i have every removed more than 200litres of slurry from a job anyway. Usually only a few bags or buckets .
The water can be separated and pumped into a foul water drain or verge. Or even filtered and used again in the pressure washer.
It does look interesting it's just the shear size which makes it impractical for myself anyway

chris scott

  • Posts: 3414
Re: mosmatic flat surface cleaner with vacuum recovery
« Reply #8 on: April 03, 2015, 06:26:54 pm »
It would need its own trailer…as a recycling  unit.  It in itself is not overly big ,but you would then need another drum to use as a filter cage.
I thought about getting some Geotextile "bags" made .Hang these inside the drum and re-fed the water from the bottom back up to the pressure washer.
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267

wpclean

Re: mosmatic flat surface cleaner with vacuum recovery
« Reply #9 on: April 03, 2015, 11:22:33 pm »
It would need its own trailer…as a recycling  unit.  It in itself is not overly big ,but you would then need another drum to use as a filter cage.
I thought about getting some Geotextile "bags" made .Hang these inside the drum and re-fed the water from the bottom back up to the pressure washer.
You remind me of Rhubarb  ;D

chris scott

  • Posts: 3414
Re: mosmatic flat surface cleaner with vacuum recovery
« Reply #10 on: April 04, 2015, 10:44:28 am »
It would need its own trailer…as a recycling  unit.  It in itself is not overly big ,but you would then need another drum to use as a filter cage.
I thought about getting some Geotextile "bags" made .Hang these inside the drum and re-fed the water from the bottom back up to the pressure washer.
You remind me of Rhubarb  ;D
Rhubarb….really?
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267