[anderclean]

any one know the best way (products/method etc.)
to remove the
previous van signage on a seconhand van ?

we've t cut back well but still have that shadow type signage
that shows up quite strong at certain angles (if you know what i mean !)

any help/suggestions appreciated..........

thanks
rob

[Sir Squeaky]

Apart from more cutting back there's nothing you can do I'm afraid.
You still might not get rid of it.

Depending on the adhesive used, it could be right through all the layers.

Just put bold signs over it.

[pylofm]

I had a van with loads of individual lettering....tried thinners, etc but in the end I used a blow gun....I am not saying do it but this is what I did and it workled for me.

Cheers
Dave.

[squeaky-clean 1]

you need to get some cutting in compound then t-cut from auto shop.

this is what you use before you respray.

it worked for us.

[East coast window cleaning Services]

you need to get some cutting in compound then t-cut from auto shop.

this is what you use before you respray.

it worked for us.

see your only down the road from me Squeaky

[s.hughes]

From what I know the best method believe it or not is a hair dryer. If you put near to it for a while it will peel off. This is normally done from the start so if you have t-cut it then I'm not sure that it will help.

Steve