[johnny bravo]

Alex i recieved a Quick loq stand top arm within my order today,      ts1cleaning.
 Middlesbrough Can you tell me what i can do with it,      sure didnt order it.    baffled as  what its purpose is,

or if anyone on here can explain its useage.
thanks.

[Alex Gardiner]

Alex i recieved a Quick loq stand top arm within my order today,      ts1cleaning.
 Middlesbrough Can you tell me what i can do with it,      sure didnt order it.    baffled as  what its purpose is,

or if anyone on here can explain its useage.
thanks.

Hi Johnny

You have given me a little challenge here interpreting your order.

Originally you placed an internet order and then later on the phone added to the original order several times during the day.

What we have now worked out is that you ordered the following items on top of the original internet order:

Extension 7 with endcap (we had to cancel #5 which you had ordered incorrectly online)

SL Brush Dual Trim Medium Mixed Bristles, QL socket, standard pencil jets

QL standard top arm (this was to convert a previous CLX22 and resi-neck to be able to use the above purchased brush with QL socket)

Push fit control valve

QL resi-neck swivel

Does this make more sense to you now?

[johnny bravo]

QL standard arm,

Ive been looking at the clx22,     do i just take the standard one apart,  off the clx22 and refit  with this new one,  so i can   change brushes if needed. without unscrewing the old resi neck off.

i was only going to get the CLX27 + extension,  but while out i thought i may need things later,      save on posting

[robert mitchell]

yes just undo the clamp  bolt and replace the top arm with the new QL arm , then put bolt back through and tighten up.

[Alex Gardiner]

QL standard arm,

Ive been looking at the clx22,     do i just take the standard one apart,  off the clx22 and refit  with this new one,  so i can   change brushes if needed. without unscrewing the old resi neck off.

i was only going to get the CLX27 + extension,  but while out i thought i may need things later,      save on posting

Yes this is correct - you would dismantle the one currently on your old CLX22 and then swap the old top arm for this new QL top arm so that you can use the new brush with it.

[johnny bravo]

EURIKA 

my main idea Alex was to use the new clx27 + extension pole  ,      for higher buildings .
the idea was to use a normal resi, and if i needed to quick change to swivel neck if needed   then straight back to normal resi neck..    instead of keeping the swivel neck on all the time.

on my old clx27 wnen i do top windows swivel is great,    must be pressore on pole at a height.
when i drop the pole down  and clean bottoms  the brush moves all over.

may need to tighten the swivel neck resi.