[supernova77]

Hi All,

I'm going to be plumbing the tank / pumps into my new van over the next week or so...

I want to use John Guest fittings... I'll be using 1/2 inch braided hose in the van - Do I need 15mm John Guest fittings or a different size?

Thanks,
Andy 

[Alex Gardiner]

Hi All,

I'm going to be plumbing the tank / pumps into my new van over the next week or so...

I want to use John Guest fittings... I'll be using 1/2 inch braided hose in the van - Do I need 15mm John Guest fittings or a different size?

Thanks,
Andy 

If using 1/2" braided hose then you would need some kind of adapter to use with John Guest 1/2" fittings. This type of connector would do the job. It will allow you to connect 1/2" hose to 1/2" John Guest fittings.



These can be bought from many online suppliers including ourselves - http://www.gardinerpolesystems.co.uk/acatalog/1-2-inch-john-guest-stem-to-1-2-inch-barb.html

[bobplum]

not sure if i am reading this right, but if you are use 1/2 inch braided hose and wish to put a 1/2 / 15 mm john guest on the end of it then 15 mm copper will fit into the comprehension end of the braided hose and into the john guest