Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Sammy46

  • Posts: 1
What wires do I cut/join to bypass flow controller on WCW backpac
« on: January 20, 2013, 06:06:39 pm »
Hi Guys.
I have a WCW backpack (blue one). My flow controller isnt working properly so I would like to just bypass it completely so that it is either on or off only.
Im not sure what wires to cut or join to bypass it.

any info is greatly appreciated.

thanks
Logged

Llaaww

  • Posts: 2260
Re: What wires do I cut/join to bypass flow controller on WCW backpac
« Reply #1 on: January 20, 2013, 06:15:20 pm »
Logged
if it is dirty it is fair game

combat1

  • Posts: 893
Re: What wires do I cut/join to bypass flow controller on WCW backpac
« Reply #2 on: January 20, 2013, 06:31:20 pm »
 :)
Logged

richard jagger

Re: What wires do I cut/join to bypass flow controller on WCW backpac
« Reply #3 on: January 20, 2013, 07:12:01 pm »
Let me help you Mate. Open up your backpack and remove the wires you can leave the controller is to block the space the connect the battery black direct to the pump black wire on the pump.Then connect the red wire to the switch to the red on the pump. If you have brown wires they are the same as the red and blue wires are the same as black wires,Good luck ;D ;D
Logged

andyM

  • Posts: 6100
Re: What wires do I cut/join to bypass flow controller on WCW backpac
« Reply #4 on: January 20, 2013, 07:15:33 pm »
Logged
One of the Plebs
Pages: [1]