Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

poole bay

  • Posts: 644
Filter change New
« on: June 23, 2012, 05:38:13 pm »
hi can any one help please iv bought a 40/40 ro filter new pre filters set it all up tds going in off mains is 350 and coming out of ro at 50 is that a high reading the 40/40 ro can you put them in the wronge way round if so what would happen ? the water is coming out really fast in the holding tank its going in a softner to any help would be great
Logged

poole bay

  • Posts: 644
Re: filter change
« Reply #1 on: June 25, 2012, 05:20:16 pm »
no worries found the info on a different site  ;D
Logged

ben M

  • Posts: 4720
Re: filter change
« Reply #2 on: June 25, 2012, 05:23:28 pm »
Quote from: poole bay on June 25, 2012, 05:20:16 pm
no worries found the info on a different site  ;D
so tell us please, can be useful to others  ;)
Logged

Spruce

  • Posts: 8651
Re: filter change
« Reply #3 on: June 25, 2012, 09:48:45 pm »
really don't understand what he was asking about in the first place.

Changing the prefilters won't change the output TDS once they have been properly flushed. Do this before coupling up the R/O.
Logged
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

Carl@Cwc

  • Posts: 1076
Re: filter change
« Reply #4 on: June 25, 2012, 10:15:35 pm »
easy mistake to make though,
not disconnecting the filters before the RO to give them a thorough flush.

been there and done it.

i change the filters and di resin and put RO on a couple hour flush when tds rises.
its like starting afresh then..

these tips and tricks are only down to this forum though.
learning/reading tediously
Logged
Pages: [1]