[Ryan @ Transparent, Carlisle]

just a couple of leaks to sort out - extra PTFE tape, and a female endstop for 2nd hose reel

made some wooden brackets to hold brushes, poles, A-frames, onto the roofs, just need more pipe insulation to wrap round it and it's good to go.

[Ryan @ Transparent, Carlisle]

im estimating that with this 2man setup, that my round can be completed in 3 to 3.5 (weather depending) weeks out of 4

[P @ F]

You might want to put your shurflo pump the right way up though !   

Rich

[Ryan @ Transparent, Carlisle]

the one on the left?

When i first got wfp, that was the way i had it installed in the van, by the person who i bought it off, who apparently knew what he was doing, but also installed the D.I before the pump... so it went tank - DI - pump

excuse my ignorance, but does it make a major difference if its the wrong way round?

cheers

[P @ F]

The story goes that if the diaphram in the pump leaks then water will damage the important end of the pump , i have never heard of this happening , but who knows , and to add to that , i have got 2 streamboxes , the pumps are on their sides !
So ignore me , i am but a fool with a lager in hand 

Rich 

[Ryan @ Transparent, Carlisle]

well, i shall turn it the other way up, when i get a minute 

i am but a fool with a cider in hand

[andyM]

Had my Shurflo arse upwards for years. Never had any problems 

[P @ F]

Must be an old wives tale then 

Im now sat here with a lager in one hand and a cider in the other my luvvverr 

Rich

[[GQC] Tim]

Is that a Brodex hose reel on the left?

[Ryan @ Transparent, Carlisle]

Not sure where the big black reel is from. I bought it 2nd hand from a guy, along woth shurflo pump n controller, di vessel and unger pole